The cocoa E6i (1/8" (3.5mm) Locking) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 2mm, and features a 1/8" (3.5mm) locking connector for compatibility with Sony transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    1/8" (3.5mm) Locking Connector    2mm Diameter Duramax Cable    Cocoa Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 2mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Will this work with the Pentax 645Z?

A: The Vello unit that was shown on your request has a sub mini connector that will not work on the 645z, you would need one with a regular USB connector. After I bought one of the hard wired cello units myself, I decided it would be better to have a radio frequency trigger control (more convenient in many situations)... so I suggested a similar unit like the Satechi USB controller which I like.

Q: 2. Sony fe

A: This will work on many of the Sony A7 and A9 series that are FE.

Q: 3. Does it work with DSC-W800? https://a href= http://www.bhphotovideo.com/c/product/1029529-REG/sony_dsc_w800_b_cyber_shot_dsc_w800_digital_camera.html target= _blank www.bhphotovideo.com/c/product/1029529-REG/sony_dsc_w800_b_cyber_shot_dsc_w800_digital_camera.html/a

A: This is Designed For Use With: B+W 403 Benro Truenight FotodioX Pro Automatic Macro Extension Tube GoGORIL Gohandle Kenko DG Extension Tube Letus35 Talon LockCircle 6500NY Opteka CXS-25 Seercam CUBE 6x SmallRig 1889 SmallRig 2081 Sony Alpha A3000 Sony Alpha A5000 Sony Alpha A5100 Sony Alpha A6000 Sony Alpha A6100 Sony Alpha A6300 Sony Alpha A6400 Sony Alpha A6500 Sony Alpha A6600 Sony Alpha A68 Sony Alpha A7 Sony Alpha A7 II Sony Alpha A7 III Sony Alpha A77 II Sony Alpha A7R Sony Alpha A7R II Sony Alpha A7R III Sony Alpha A7R IV Sony Alpha A7S Sony Alpha A7S II Sony Alpha A7S III Sony Alpha A9 Sony Alpha A9 II Sony Alpha A99 II Sony Alpha NEX-3 Sony Alpha NEX-3N Sony Alpha NEX-5 Sony Alpha NEX-5N Sony Alpha NEX-5R Sony Alpha NEX-5T Sony Alpha NEX-6 Sony Alpha NEX-7 Sony Alpha NEX-C3 Sony Alpha NEX-F3 Sony Alpha a1 Sony Alpha a6500 Sony Cyber-shot DSC-HX400V Sony Cyber-shot DSC-HX99 Sony Cyber-shot DSC-RX10 Sony Cyber-shot DSC-RX10 II Sony Cyber-shot DSC-RX10 III Sony Cyber-shot DSC-RX10 IV Sony Cyber-shot DSC-RX100 II Sony Cyber-shot DSC-RX100 III Sony Cyber-shot DSC-RX100 V Sony Cyber-shot DSC-RX100 VII Sony Cyber-shot DSC-RX1R II Sony ZV-1 Thom Alpha A6300 Tilta ES-T16 Tilta TA-BSP2-15 Tilta TA-T17-A Tilta TA-T17-B Tilta TA-T17-C-G Tilta TA-T17-FCC UURig R006 Vello EXT-SFED2 Vidpro CA-22 Viltrox Automatic Extension Tube Wimberley AP-610 Wimberley AP-611 YELANGU C5 YELANGU FIIL-YLG-206 YELANGU FIIL-YLG-CA7 Yasuhara Nanoha

Q: 4. With this work on the d500

A: Yes, this remote is compatible with the Nikon D500.

Q: 5. Does this remote shutter release fit the Samsung NX1 or NX500??

A: No. The remote shutter connector is different on the NX-1 and NX-500. Vello does not have a timer switch with this special Samsung connector.

Q: 6. Once you start a interval sequence, can you adjust the camera settings between shots(on the camera itself)? Hoping to be able to use this for the Holy Grail time-lapse method on the Sony a6500. I ask because the play memories app does not allow you to change settings once the sequence starts...

A: Yes you can change the settings on the camera in between shots.

Q: 7. is this compatible on nikon d800?

A: No, this is not compatible with the Nikon D800

Q: 8. Will this work with the Canon R7?

A: Yes, Vello ShutterBoss II Timer Remote Switch for Canon has a 2.5 mm Sub-mini connector.

Q: 9. How long is the cable?

A: The cable measures 35 inches.

Q: 10. Would this device work with Fujifilm X-E2, X-T1 and X-T2? I appreciate all answers. Thank you.

A: I have the wireless version for Nikon and I also bought the wired version for Canon for a friend. On the wireless version:The receiver and the remote control are the same for Nikon, Cannon, what have you. The difference is in the cable that connects the receiver to your camera. On the receiver end, there is a mini 2.5mm jack. On the camera end, there are of course a variety of connectors. Fujifilm XT1 and XT2 have 2.5mm sub-mini (2-Ring). So I would go with that 2.5mm sub-mini which is listed under Canon 2.5 sub-mini. On the wired version: the cable cannot be unplugged;