The black E6i (4-Pin Hirose) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 1mm, and features a 4-pin Hirose connector for compatibility with Lightspeed transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    4-Pin Hirose Connector    1mm Diameter Cable    Black Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 1mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Hey Guys, I have a Wireless ShutterBoss Timer Remote (Nikon 10-Pin Connection), connected to a D700, I have also just purchased a Nikon GP-1A GPS Module, I am hoping to be able to use both devices simultaneously, but my problem is I have only the 1 10pin connector, is it possible to utilise the Vello RCC-N3 cable to connect the Shutter Boss Receiver to the GP-1A Im not sure what kind of plug the GP-1A uses, but the look to be about the same size? your feedback would be appreciated. Kind regards. Tony.

A: I use a GPS unit and they have a cable that splits the signal. I found that this splitter is available, but B&H won't let me mention other stores or links and B&H doesn't carry their products. If you research other GPS units for your camera you might stumble across this 10 pin Y splitter cable for Nikon .

Q: 2. Has anyone tried this on the Leica SL2?

A: We tested this Vello ShutterBoss II Timer Remote Switch for Panasonic and Leica with the Leica SL2, and it did not work.

Q: 3. Does this work on a Canon T4i?

A: No , for Canon T4I you will need Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection BH #VERCC12

Q: 4. Is there any advantage of buying a wired timer remote versus buying a wireless timer remote? Or vice versus? Is one really better than the other?

A: The wired remote always works the same cannot be said for the wireless plus I believe it uses up more battery in your camera. The always works is what I want and having a cable is not a big deal.

Q: 5. HiWill it work with Nikon D3000?Thanks

A: This has bee Designed For Use With: Dot Line DL-MEX Kenko Auto Extension Tube Movo Photo EXT-N25 Nikon COOLPIX P1000 Nikon COOLPIX P950 Nikon Coolpix A Nikon Coolpix P7700 Nikon Coolpix P7800 Nikon D3100 Nikon D3200 Nikon D3300 Nikon D5100 Nikon D5200 Nikon D5300 Nikon D5500 Nikon D5600 Nikon D600 Nikon D610 Nikon D7000 Nikon D7100 Nikon D7200 Nikon D750 Nikon D7500 Nikon D780 Nikon D90 Nikon Df Nikon PK-11A Nikon PK-13 Nikon Z5 Nikon Z6 Nikon Z6 II Nikon Z7 Nikon Z7 II Vello EXT-N1E Vello EXT-ND Vello EXT-ND2 Vello EXT-NFM Viltrox Automatic Extension Tube

Q: 6. will this work with Canon M5?

A: This remote switch works with my Sony A7R II. I am not sure if it would work with Canon MS.

Q: 7. Will this control auto-focus?

A: The shutter button on the ShutterBoss II Timer Remote Switch for Canon with 3-Pin Connection will control autofocus the same as the actuator on the camera. If you push half way it engages autofocus and if you push all the way down you engage the shutter and take a still. When starting a time-lapse interval, the ShutterBoss will control the autofocus for the first shot, but will NOT for the consecutive shots.

Q: 8. does this work with canon 5d mark 4?

A: It should but you should check with B&H and the manufacturer. It works with my 5D Mk3.

Q: 9. Will this device work with an A57? Would I be able to connect the device to one of the ports on the A57?

A: Hello Micheal, This device can work on many camera models. It will work on your a57. This model has many different cables to be used on many cameras so just be sure you specify the camera model when purchasing. I like the shutterboss and I use it often.

Q: 10. I have a Sony a6000 and want to use this remote for sports photography. Will this remote allow me to shoot in drive (continuous) mode at the full 11 FPS?

A: No, I found that when you set it to high speed and you use the wireless shutter release it only shoot in spurts of three. Even if you held the button down it will only shoot three frames at a time, so you'll have to keep releasing and pressing again to have continuous shots. Of course when you do this you loose the full potential of the camera.The only remote to give you the same capabilities of the on-camera shutter is the Wired remote. Please note that these Vello wireless remotes are very high in technology but very low in build quality. You'll find yourself buying new cables every few weeks if you allow even the most moderate stress on them. Even the Sony wired remote has a short lifespan.When the Shutterboss II is working it is truly wonderful. I am content with the three rapid shots (at the full 11fps) because I use it for birds flying off a static perch with the camera attached to a 600mm lens in manual focus. The three shots are fine for me because after three shots the bird will be out of focus anyway.