You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And Hirose 4-pin Connector For Lightspeed Wireless Transmitters (black)

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And Hirose 4-pin Connector For Lightspeed Wireless Transmitters (black)
  • Product Code: ga232156
  • Availability: In Stock

$1,964.85 $2,593.60

The black E6 Directional Earset Mic, Highest Overload, with Detachable 2mm Cable and Hirose 4-Pin Connector for Lightspeed Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a Hirose 4-pin connector for direct connection to a Lightspeed BP-200 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    Hirose 4-Pin (LH), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLightspeed: BP-200
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x Hirose 4-Pin
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLightspeed: BP-200
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x Hirose 4-Pin
Cable Length5' / 152.4 cm
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. can you use this remote with Canon ET-1000N3 33 ft extension?

A: This remote will not be compatible with the ET-1000N3.

Q: 2. does this work for the nex 6 ?

A: I wish I knew; I have the Sony A7ii. I will pass question to a friend of mine who may still have his NEX.

Q: 3. Will this controller work with a FujiFilm X-Pro-2 camera ? it has the same plug in as the Sony cameras ...

A: Page 72 of the Fujifilm X-Pro2 Mirrorless Digital Camera's instruction manual states that Electronic releases from third-party suppliers can be connected via the microphone/remote release terminal. A confirmation dialog will be displayed when a third-party release is connected; press MENU/OK and select REMOTE for MIC/REMOTE RELEASE. Page 45 of the manual indicates the Mic/Remote terminal is a 2.5mm sub-miniphone terminal, not the terminal used with the Sony camera. As such, the remote you list above would not be compatible for your needs. The Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, B&H # VERCC12, would be the correct remote for use with the Fujifilm X-Pro2 Mirrorless Digital Camera.https://a href= http://static.bhphotovideo.com/lit_files/152675.pdf target= _blank static.bhphotovideo.com/lit_files/152675.pdf/a

Q: 4. Does this work on the Lecia Q2?

A: Unfortunately, Leica Q2 does not have a terminal to connect wired remotes to the camera. The only way to have remote control operations is via Bluetooth and wifi using the Leica Fotos App on your smart devices.

Q: 5. Anyone know where I can get a PDF of the manual for the RC-C2II ? for canon.

A: Under the Overview tab, there is a link that says Guides & Manuals which you can click to view an instruction manual for the Shutterboss Version II Timer Remote Switch for Canon with 3-Pin Connection.

Q: 6. will this shoot in Bulb?

A: Yes...it does do Bulb Mode!

Q: 7. Is there an adapter so that I can use this with the Nikon D60?

A: No unfortunately. The D60 does not have any input to plug a wired remote into.

Q: 8. Will this work with the Canon M3?

A: This remote is not compatible with the Canon M3. You can instead use the Canon RC-6.

Q: 9. Will this work to start video on a Canon 5D Mark iii?

A: As indicated on page 244 of the Canon EOS 5D Mark III DSLR camera's instruction manual, you can go to the camera's MENU button, then go to the Camera Settings menu (to the 5th tab), where there is an option that says Movie Shooting Button. If you choose the setting that allows you to use both the shutter button and the START/STOP button to begin video recording, you could then use a remote shutter release to start the video recording (however, do note that, with this setting, you would not be able to take pictures during video recording). If you have the above setting set in your camera, then yes, the Vello Wireless ShutterBoss II Remote Switch with Digital Timer for Select Canon Cameras may be used to start video recording on your camera.

Q: 10. Does this work with the Fuji X-T2?

A: I'm not 100% sure, but if other remotes with a 2.5 mini jack I don't see why this one wouldn't.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Dji Lavalier Microphone For Mic 2

$117.00 $162.63

Nanuk 908 Hard Case (orange, 8.8l)

$230.85 $293.18

Art Usb Phono Plus Phono Preamp With Usb

$299.97 $380.96

Products You May Like

Dell Premium Active Pen

$253.32 $354.65

Tiffen 4 X 6" Cc20y Yellow Filter

$1,199.85 $1,667.79

Nikon Af-s Nikkor 105mm F/1.4e Ed Lens

$6,290.85 $8,995.92