You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 1mm Cable And Mini 4-pin Connector For Mipro Wireless Transmitters (black)

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 1mm Cable And Mini 4-pin Connector For Mipro Wireless Transmitters (black)
  • Product Code: ga232160
  • Availability: In Stock

$1,964.85 $3,065.17

The black E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and Mini 4-Pin Connector for MIPRO Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a mini 4-pin connector for direct connection to a Mini MIPRO 4-pin model wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    Mini 4-Pin (MN), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersMIPRO: ACT-707T (Older), MT-103 (Older), MT-303 (Older), MT-801 (Older), MT-808 (Older)
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x MIPRO Proprietary 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersMIPRO: ACT-707T (Older), MT-103 (Older), MT-303 (Older), MT-801 (Older), MT-808 (Older)
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x MIPRO Proprietary 4-Pin Female
Cable Length5' / 152.4 cm
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. Will the power button completely turn off the battery and shut off the power output?

A: Even when the SmallRig VB50 is totally shut down there will be power draw. It’s normal that when in long time storage the battery will lose some power because it has self-consumption. If the battery is left unused for a long time, please charge it to about 70% every three months and put it in a dry and ventilated environment for a longer lifespan.

Q: 2. What does the power button do? I assume that it cuts the power off completely to all the ports. If it doesn't do that, then what is it for?

A: Yes, The only function of the power button is to power down the battery. It would cut power to the output ports.

Q: 3. Can it power an Aputure 120D?

A: While the VB50 Mini V-Mount Battery could support the draw of the C120D, it would not be able to power it at full output for a very long time.

Q: 4. Can this battery power a sony a6300 with a dummy battery from the 8 volt barrel port?

A: No, the SmallRig VB50 Mini V-Mount Battery cannot power The Sony a6300 with a dummy battery from the 8 volt barrel port.

Q: 5. How many and which outputs can work simultaneously?

A: All of the SmallRig VB50 Mini V-Mount Battery (50Wh) power outputs could be used simultaneously.

Q: 6. Which cable/adaptor, DC out to dummy battery, would work with this battery and a Sony a7IV?

A: The SmallRig VB99 Mini V-Mount Battery (99Wh) can power a Sony a7 IV by using the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable.

Q: 7. Will this work as an external battery for the Zhiyun Crane Labe 3?

A: No, the Zhiyun Crane 3-Lab Handheld Stabilizer for DSLR (BH #ZHCRANE3LAB) cannot be powered via external battery, so the SmallRig VB50 Mini V-Mount Battery (50Wh, Black) would not work as an external power source.

Q: 8. With only one D-Tap port, would it be safe to run a D-Tap Splitter cable from the D-Tap Out on this battery to power multiple other devices?

A: Yes, A dtap splitter would work with Smallrig VB battery solutions. Example splitter idea. -https://bhpho.to/3WtpFCL

Q: 9. Looks great. Does the display update remaining power in time depending on usage ?

A: Yes, the SmallRig VB99 Mini V-Mount Battery (99Wh) shows battery capacity left on the LCD when used.

Q: 10. Is this compatible with the Smallrig RC 220B light? About how long would it last?

A: You could use the SmallRig VB99 Mini V-Mount Battery (99Wh) to power the SmallRig RC 220B COB Bi-Color LED Video Light (2700-6500K), but it would be just meeting the minimum power requirements of the light. I would recommend considering a battery with higher output, such as the Nanlite 230Wh 26V V-Mount Li-Ion Battery (BH #NABTV26V230).

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Altronix 6/12/24vdc Relay Module

$33.60 $42.00

Novoflex Mini Clamp

$213.00 $283.29

Verkada Wireless Relay

$297.00 $356.40

Altronix Rbsn Relay Module

$32.85 $47.30

Altronix Ultra Sensitive Relay Module

$55.35 $81.36

Fsr It-r4 Relay Module

$790.50 $956.50

Rdl Tx-pcr1 Paging Controlled Relay

$573.51 $774.24

Products You May Like

Birddog 4k Camera Mount

$119.85 $167.79

M-edge Flip Case For Ipad Air 2 (black)

$83.97 $104.96

Jbl Am7212/26 2-way 12" Loudspeaker System (black)

$10,554.00 $16,675.32

Cardellini Pin Adapter

$83.67 $104.59

Blackmagic Design Body Cap For Arri Pl

$45.00 $58.50