The tan E6 Directional Earset Mic, Medium Gain, with Detachable 1mm Cable and 3.5mm Locking Connector for Nady Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm locking connector for direct connection to a Nady UB10, UB16, WLT14, or WLT15 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3.5mm Locking (NL), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. If I buy a shutter release for my sony a6000, do i still need to purchase the sony app for timelapsees?

A: No,it doesn't require the Sony app.

Q: 2. will it work with the canon r?

A: No, the Canon EOS R Mirrorless Digital Camera has a Sub Mini Connection ands will not work with the Vello ShutterBoss II Timer Remote Switch for Canon with 3-Pin Connection. The correct remote would be the Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, BH #VERCC12 (https://bhpho.to/2WOUJT3).

Q: 3. I saw one comment about it requiring the use of the hot shoe. Is this correct? and if so, is there a way to use this with a flash as well?

A: It is not required to use the hot shoe. It's merely a place to attach it to the camera. It can dangle from the cord attached the remote input if need be.

Q: 4. Will this remote work with a digital Sony a99 camera? It only shows that it will work up to a Sony a77ii digital camera.

A: yes it works very well with sony

Q: 5. Is this the best choice for a Canon Mark III 5D?

A: No, that version is not compatible. For the 5D Mark III you need this one. http://bhpho.to/PNMxo0

Q: 6. does this unit work with extension cord MC-21 from Nikon?

A: The Nikon MC-21 is specifically designed for use with Nikon 10-pin remote shutter releases. Unfortunately, we cannot guarantee that it would work with a third party remote shutter release such as the ShutterBoss. We dont have one in stock to try.

Q: 7. I accidentally bought the 3 pin model for my 70D. is there any i could use an adaptor to change it to a sub mini connection so that I could use it on my 70D, or do I have to return the product and buy this model.

A: Unfortunately, this is a wired switch and cannot have the wires be interchangeable. You will need to purchase the Vello Shutterboss Version II for Sub Mini Connection separately.

Q: 8. Will this work with the Nikon D750?

A: Yes, the Vello Shutterboss Version II Timer Remote Switch for Nikon with DC2 Connection would be compatible for use with the Nikon D750 DSLR camera.

Q: 9. What is new in version 2?

A: According to Vello, there are two new additions with the Shutterboss II over the original model. A power off option has been added to simply help conserve battery life. The other option is a reset back to factory settings so that each setting does not need to be reset individually.

Q: 10. I have an Olympus E-M1 Mark iii which has a sum mini connection. Will this work on it?

A: Yes, it will work with the EM1 mkIII.