The black E6 Directional Earset Mic, Medium Gain, with Detachable 1mm Cable and LEMO 3-Pin Connector for Sennheiser Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a LEMO 3-pin connector for direct connection to a Sennheiser SK 50, SK 250, SK 3063, SK 5012, SK 5212, or SK 9000 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    LEMO 3-Pin (S3), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Just want to confirm that I can choose an exact exposure time, say 7 seconds, and then take a couple of shots, and then change to 4 seconds (without adjusting the time on the camera!) and keep shooting using only the remote with the display showing the selected interval? Thinking about fireworks photography when you want to keep experimenting with the shutter time but don't want to touch the camera.

A: You can adjust the shutter speed as long as the camera is in Bulb mode. The fastest shutter speed the ShutterBoss can achieve is 1 second. If you need a shutter speed faster than 1 second then you will need to use the camera's setting.

Q: 2. Will this remote work with Sony A7R V?

A: Yes, the Vello Shutterboss II for Sony Multi-Terminal can work with the Sony A7R V.

Q: 3. This 2.5mm connection is the same as on the Fujifilm remote release RR-100. Will not this Vello Shutter Boss II Timer Remote Switch work on the new Fujifilm XPro3 ?

A: While this remote could work with the X-Pro 3, it has not been tested by Vello to our knowledge.

Q: 4. Purchased this unit two days ago and will not fit on top of the Sony a77M2 flash mount. According to website this is the unit for this camera. Cold mount is to big to fit the flash mount. What are you going too do to correct this problem to make this item work properly?

A: Dennis, Not sure what is not fitting properly. Does the locking wheel hit the top of the camera body? I notice from photos of the a77M2 that the top of the body housing comes up flush with the front of the flash hot shoe, which often is not the case with other cameras. Try to fit the receiver in backwards in the flash shoe. The receiver itself doesn't need to attach to the camera for the remote to work. If the unit slides in part way, you can still lock it in with the wheel. But the actual foot of the ShutterBoss receiver mount should fit into a standard flash hot shoe.

Q: 5. Is there any advantage of buying a wired timer remote versus buying a wireless timer remote? Or vice versus? Is one really better than the other?

A: The wired remote always works the same cannot be said for the wireless plus I believe it uses up more battery in your camera. The always works is what I want and having a cable is not a big deal.

Q: 6. Can the Nikon version be used to trigger video recording on a D810 at 30:00 intervals? I'd like to use the device to allow me record continuously for several hours, bypassing the camera's 30-min per video limit. Is it possible to use the device to trigger a recording to begin at say intervals of 30:01?

A: You can set the Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection (B&H# VERCN12) to produce the effect of pushing the shutter button at intervals of 30:01, if you like. Please keep in mind that you'll want to reassign the shutter button thusly to have it function for starting or stopping video: https://bit.ly/3n2dEnO

Q: 7. ISn't that wierd. Some pleople claim it works on A7 iiii and A7r iii while some other people claim it doesn't work! In the overview it is mentioned the two cameras are mentioned as compatible. WHo am I to believe now?

A: The RC-S2II Vello ShutterBoss II is compatible with the Sony A7II and the A7III cameras.

Q: 8. Will this work with the Fuji XT-2?

A: I'm afraid not. Instead you would want B&H #VERCWIIC1, which is compatible with the Fuji XT-2, B&H #FUXT2B.

Q: 9. will this work with a Nikon D300?

A: The Nikon D300 uses the remote with the Nikon 10-Pin Connection. The product code for that is, BH #VERCN12 • MFR #RC-N1II.

Q: 10. Will this remote start and stop video?

A: some cameras you can assign the shutter to start stop video , if your camera allows you to do that then you can use this remote to start/stop video