The black E6 Directional Earset Mic, Medium Gain, with Detachable 1mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm locking connector for direct connection to a Sennheiser Evolution Series (G2 and G3), EW 100, EW 300, EW 500, or SK 1093 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3.5mm Locking (SR), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. will this work with a Nikon D300?

A: The Nikon D300 uses the remote with the Nikon 10-Pin Connection. The product code for that is, BH #VERCN12 • MFR #RC-N1II.

Q: 2. Hey Guys, I have a Wireless ShutterBoss Timer Remote (Nikon 10-Pin Connection), connected to a D700, I have also just purchased a Nikon GP-1A GPS Module, I am hoping to be able to use both devices simultaneously, but my problem is I have only the 1 10pin connector, is it possible to utilise the Vello RCC-N3 cable to connect the Shutter Boss Receiver to the GP-1A Im not sure what kind of plug the GP-1A uses, but the look to be about the same size? your feedback would be appreciated. Kind regards. Tony.

A: I use a GPS unit and they have a cable that splits the signal. I found that this splitter is available, but B&H won't let me mention other stores or links and B&H doesn't carry their products. If you research other GPS units for your camera you might stumble across this 10 pin Y splitter cable for Nikon .

Q: 3. Is there any advantage of buying a wired timer remote versus buying a wireless timer remote? Or vice versus? Is one really better than the other?

A: The wired remote always works the same cannot be said for the wireless plus I believe it uses up more battery in your camera. The always works is what I want and having a cable is not a big deal.

Q: 4. Does this unit remember the last setting after power off and on again?

A: Yes, this would hold your settings after it is turned off and back on again.

Q: 5. will this work with a FujiFilm X-Pro-2 camera? it has the same plug in as the Sony

A: Page 72 of the Fujifilm X-Pro2 Mirrorless Digital Camera's instruction manual states that Electronic releases from third-party suppliers can be connected via the microphone/remote release terminal. A confirmation dialog will be displayed when a third-party release is connected; press MENU/OK and select REMOTE for MIC/REMOTE RELEASE. Page 45 of the manual indicates the Mic/Remote terminal is a 2.5mm sub-miniphone terminal, not the terminal used with the Sony camera. As such, the remote you list above would not be compatible for your needs. The Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, B&H # VERCC12, would be the correct remote for use with the Fujifilm X-Pro2 Mirrorless Digital Camera.https://a href= http://static.bhphotovideo.com/lit_files/152675.pdf target= _blank static.bhphotovideo.com/lit_files/152675.pdf/a

Q: 6. Can we use the BlackMagic SpeedBooster from the original pocket camera?

A: While it will still be mechanically compatible, the BMPCC Speedbooster is for a specific sensor size. Since the sensor in this camera is bigger than the Pocket CinemaCamera, it will not be optically compatible and vignetting will occur.

Q: 7. Will the “Shutter Boss II,” work with the Fuji XT-4 ?

A: No, you will need a remote with a sub mini connection. Click the link below to view; https://bhpho.to/2GyhZfQ

Q: 8. ISn't that wierd. Some pleople claim it works on A7 iiii and A7r iii while some other people claim it doesn't work! In the overview it is mentioned the two cameras are mentioned as compatible. WHo am I to believe now?

A: The RC-S2II Vello ShutterBoss II is compatible with the Sony A7II and the A7III cameras.

Q: 9. Will burst mode work for continuous 11 FPS shooting while connected via cable?

A: If the camera in question is capable of shooting at 11 frames per second, then yes, it will be possible to do so when shooting with a ShutterBoss connected.

Q: 10. When button is depressed and held, does this complete all shots for a bracketed / HDR image?

A: If the camera is set for bracketing/HDR, yes. One depression of release works, camera does the rest.