The black E6i (1/8" (3.5mm) Locking) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 1mm, and features a 1/8" (3.5mm) locking connector for compatibility with Sennheiser transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    1/8" (3.5mm) Locking Connector    1mm Diameter Cable    Black Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 1mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Will this remote work with Sony A7R V?

A: Yes, the Vello Shutterboss II for Sony Multi-Terminal can work with the Sony A7R V.

Q: 2. Can I control multiple cameras if I use a cable splitter?

A: Unfortunately, we do not know as this cable was not designed for the purpose of being split to control multiple cameras. A cause of concern may be that by spitting the cable, the operating voltage may fall below what is needed to trigger the camera. As such, I would state to purchase and experiment at your own risk.

Q: 3. cord length?

A: The Cable Length is: 2.7' / 85 cm

Q: 4. Is this compatible with Panasonic G85 camera?

A: Unfortunately this will not fit the Panasonic G85

Q: 5. Will this work with my Sony a77?

A: This would be compatible with the following B+W 403 Benro Truenight FotodioX Pro Automatic Macro Extension Tube GoGORIL Gohandle Kenko DG Extension Tube Letus35 Talon LockCircle 6500NY Opteka CXS-25 Seercam CUBE 6x SmallRig 1889 SmallRig 2081 Sony Alpha A3000 Sony Alpha A5000 Sony Alpha A5100 Sony Alpha A6000 Sony Alpha A6100 Sony Alpha A6300 Sony Alpha A6400 Sony Alpha A6500 Sony Alpha A6600 Sony Alpha A68 Sony Alpha A7 Sony Alpha A7 II Sony Alpha A7 III Sony Alpha A77 II Sony Alpha A7R Sony Alpha A7R II Sony Alpha A7R III Sony Alpha A7R IV Sony Alpha A7S Sony Alpha A7S II Sony Alpha A7S III Sony Alpha A9 Sony Alpha A9 II Sony Alpha A99 II Sony Alpha NEX-3 Sony Alpha NEX-3N Sony Alpha NEX-5 Sony Alpha NEX-5N Sony Alpha NEX-5R Sony Alpha NEX-5T Sony Alpha NEX-6 Sony Alpha NEX-7 Sony Alpha NEX-C3 Sony Alpha NEX-F3 Sony Alpha a1 Sony Alpha a6500 Sony Cyber-shot DSC-HX400V Sony Cyber-shot DSC-HX99 Sony Cyber-shot DSC-RX10 Sony Cyber-shot DSC-RX10 II Sony Cyber-shot DSC-RX10 III Sony Cyber-shot DSC-RX10 IV Sony Cyber-shot DSC-RX100 II Sony Cyber-shot DSC-RX100 III Sony Cyber-shot DSC-RX100 V Sony Cyber-shot DSC-RX100 VII Sony Cyber-shot DSC-RX1R II Sony ZV-1 Thom Alpha A6300 Tilta ES-T16 Tilta TA-BSP2-15 Tilta TA-T17-A Tilta TA-T17-B Tilta TA-T17-C-G Tilta TA-T17-FCC UURig R006 Vello EXT-SFED2 Vidpro CA-22 Viltrox Automatic Extension Tube Wimberley AP-610 Wimberley AP-611 YELANGU C5 YELANGU FIIL-YLG-206 YELANGU FIIL-YLG-CA7 Yasuhara Nanoha

Q: 6. Does it work with a Nikon D7200?

A: Read! Read and see which Nikon it works with! Scroll through the one available and pick the one that works with your camera! I have Canon!

Q: 7. Does anyone know if this works with the sony a7riii?

A: This would be compatible with the Sony Alpha A7R III

Q: 8. Will this remote work with a Fuji-film XT-1 if you use the vello RCC F1-2.5 cable (B&H # VERCCF12.5 MFR # RCC-F1-2.5)? Part two - is the RCC F1-2.5 cable compatible with this Vello shutter boss ll remote? Thank you

A: Yes, if you use cable B&H # VERCCF12.5, you can use this remote with the Fuji XT-1.

Q: 9. does this work with the Canon 60D?

A: This will work with a 60D, but you must get the version with the sub mini connector, not the 3-pin connector.

Q: 10. Does it work with Sony a9?

A: Yes, this would work with the Sony A9