The BCJ-XJ-TRC 110Ω-to-75Ω Digital Audio Impedance Transformer from Canare is a transformer that passively converts all standard AES/EBU digital audio signals from 110Ω/XLR3 to 75Ω BNC coaxial cable. This solution is ideal for use in post-production suites, DAT routing, recording studios, and digital audio tie lines. It also permits longer cable runs in comparison with twisted pair 110Ω and additionally provides excellent rejection against hum and noise.

XLR/F to BNC/F

Use this transformer to passively convert standard AES/EBU digital audio signals from 110Ω/XLR3 to 75Ω BNC coaxial cable.

This solution is well suited for use in post-production suites, DAT routing, recording studios, and digital audio tie lines, among other possible applications.

This unit provides excellent rejection against hum and noise.

Related Questions and Answers

Q: 1. Will this fit on a Sony A7R?

A: You can use the Bolt VM-110 LED Macro Ring Light with the a7R, yes.

Q: 2. Will this work on the Nikon D610 with a 28-300mm lens (77mm)?

A: Yes, the Bolt VM-110 will work on a Nikon D610 with a 28-300mm lens.

Q: 3. Can you connect an AC Adapter instead of using batteries?

A: Richard, no you cannot. Please know the batteries seem to last a long time. In addition, if you are considering using this ring light with an MP-E65mm lens it will not be sufficient for the close range.

Q: 4. Does it work with Sony Alpha 99?

A: works with all reflex , brings many adapters ring in the box

Q: 5. Will this work on a Nikon 1 J5 mirrorless camera (10-30mm)?

A: In the description it states that an adapter ring is included which threads onto the front of the camera's lens. If you camera lens can accept filters of one of the sizes entioned, then yes thus will work. Check the description of the Ring Light then check your camera!

Q: 6. Does this product support a specific brand, such as Canon, or any camera with a hot shoe? Thanks.

A: Being that this is a continuous light, and not a flash/strobe TTL is of no issue here. TTL only pertains to flashes and strobes. Using this device would be essentially the same as working under any other natural light source such as the sun or a lamp etc. You can set your camera to program modes or manual modes to expose with whichever you prefer and it will render great results. The only cameras the device would not be able mount the base to are the Sony Alpha and older Minolta cameras with the special Sony/Minolta shoe.

Q: 7. will this work on a Canon T3i?

A: The Bolt VM-110 Ring Light is compatible with the Canon T3i. It comes with a set of adapter rings (49, 52, 55, 58, 62, 67, 72, and 77mm) which allow you to attach the ring light on to the lens.

Q: 8. I am using a Fuji hs30exr camera with hotshoe flash mount, will this work with that camera model?

A: it will work but not with TTL metering

Q: 9. compatible with sony a6000?

A: It is compatible with the camera body, as Sony uses TTL with the Hot Shoe. The problem is with attaching the adaptor rings to the lens. The standard lens, Sony E-16-50 mm, only has a filter thread of 40.5mm and will not work. The accessory lens Sony E-55-210mm however has a filter thread of 49mm and work nicely. Bottom line is the filter thread size. The VM-110 LED Macro Ring Light supports 8 thread sizes. Hope this helps.

Q: 10. Will it work for a canon power shot sx530?

A: This threads on the end of the lens. As the Power Shot lacks threads there, it will not work as designed.