You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Gain, With Detachable 2mm Cable And Lemo 1-pin Connector For Sennheiser Wireless Transmitters (beige)

Countryman E6 Directional Earset Mic, Highest Gain, With Detachable 2mm Cable And Lemo 1-pin Connector For Sennheiser Wireless Transmitters (beige)
  • Product Code: ga232875
  • Availability: In Stock

$2,036.85 $2,505.33

The beige E6 Directional Earset Mic, Highest Gain, with Detachable 2mm Cable and LEMO 1-Pin Connector for Sennheiser Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a LEMO 1-pin connector for direct connection to a Sennheiser BF 1083 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    LEMO 1-Pin (S1), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersSennheiser: BF1083
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x LEMO 1-Pin
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersSennheiser: BF1083
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB
Sensitivity6.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x LEMO 1-Pin
Cable Length5' / 152.4 cm
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBeige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 1.98 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. will this work on a Nikon D300 10 pin?

A: The Nikon D300 uses the remote with the Nikon 10-Pin Connection. The product code for that is, BH #VERCN12 MFR #RC-N1II.

Q: 2. Will this work with the Nikon D750?

A: Yes, the Vello Shutterboss Version II Timer Remote Switch for Nikon with DC2 Connection would be compatible for use with the Nikon D750 DSLR camera.

Q: 3. does this unit work with extension cord MC-21 from Nikon?

A: The Nikon MC-21 is specifically designed for use with Nikon 10-pin remote shutter releases. Unfortunately, we cannot guarantee that it would work with a third party remote shutter release such as the ShutterBoss. We dont have one in stock to try.

Q: 4. Will this work with the a99 ?

A: This would be compatible with the Sony Alpha A99 II

Q: 5. Will this remote work with a digital Sony a99 camera? It only shows that it will work up to a Sony a77ii digital camera.

A: yes it works very well with sony

Q: 6. Is there an adapter so that I can use this with the Nikon D60?

A: No unfortunately. The D60 does not have any input to plug a wired remote into.

Q: 7. Will this work with the Canon EOS R5 and R6?

A: Hello! This will work on the R6. You'll need the three pin connection for the R5.

Q: 8. I accidentally bought the 3 pin model for my 70D. is there any i could use an adaptor to change it to a sub mini connection so that I could use it on my 70D, or do I have to return the product and buy this model.

A: Unfortunately, this is a wired switch and cannot have the wires be interchangeable. You will need to purchase the Vello Shutterboss Version II for Sub Mini Connection separately.

Q: 9. Will this work with Panasonic G9 ?

A: Yes this will work on your Panasonic G9.

Q: 10. Will this work to start video on a Canon 5D Mark iii?

A: As indicated on page 244 of the Canon EOS 5D Mark III DSLR camera's instruction manual, you can go to the camera's MENU button, then go to the Camera Settings menu (to the 5th tab), where there is an option that says Movie Shooting Button. If you choose the setting that allows you to use both the shutter button and the START/STOP button to begin video recording, you could then use a remote shutter release to start the video recording (however, do note that, with this setting, you would not be able to take pictures during video recording). If you have the above setting set in your camera, then yes, the Vello Wireless ShutterBoss II Remote Switch with Digital Timer for Select Canon Cameras may be used to start video recording on your camera.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Quicksafes Quickvent Safe

$659.97 $884.36

Nexto Di Xqd Module For The Nsb-25

$419.97 $638.35

Apple 13" Macbook Air (m2, Starlight)

$5,697.00 $8,488.53

Smallrig Air-cushioned Light Stand

$207.00 $314.64