The ARS2 2U Accessory Rack Shelf from Odyssey Innovative Designs is a rack shelf designed for use in standard 19" equipment racks. Use this convenient unit to hold various equipment, parts, and other items that are integral to the management of your setup. It is especially useful for components that are not intended for rackmount placement, yet nevertheless play an essential role in your rack. This unit occupies 2U of rack height and will support up to 35 lbs.

Rack Accessory Shelf    Accommodates Non-Rackmount Equipment    Supports 35 lbs

Use this rack shelf to accommodate virtually any item or component in your rack.

This shelf will support up to 35 lbs.

Related Questions and Answers

Q: 1. Will this work with a bridge camera Panasonic fz300 & Nikon p900 for photography ?

A: hello David, as long as the HDMI remains "open" during shooting (except the shutter of course) then yes no issues. if it cannot do it simultaneously then it will not work.

Q: 2. Would this battery pack work with sunwayfoto L-bracket "SUPNLD850G", or similar products from other vendors?

A: Yes, it will work.

Q: 3. Can you use a 1/4-20 screw through the hole in the middle of the tabs to attach to very small compact cameras?

A: NoNot safe to clip a camera on it!

Q: 4. How about Battery Life? Is it the same as Shogun Inferno?

A: With a 5200mah Battery, the kind found in B&H # ATOMPWRKT1, you will get around 3 hours of operation time. The battery life is very good with this monitor. https://bhpho.to/2T5VQv0

Q: 5. Will this holdup to being on a black rapid type strap ?

A: Yes this would hold up very well.

Q: 6. Is this grip compatible with the new Nikon EN-EL18c battery? I noticed Nikon discontinued the EN-EL18b, so I just wanted to make sure.

A: Yes this will be able to use the EN-EL15C batteries.

Q: 7. Do I need to buy the BL-5 Cover separately to be able to use this with the EN-EL18b Battery?

A: The EN-EL18b requires a BL-5 cover, not included with a grip. Its more than a cover as it actually holds the battery. I use a EN-EL18 battery which works fine with the Nikon made battery grip and BL-5 cover. While it all fits in the BG-N19-b with the EN-EL18 it did not connect properly to the D850. Thus Im returning the BG-N19-b. The BL-5/EN-EL18 works fine in another non-Nikon battery grip with a D500.

Q: 8. I just installed my new grip yesterday. After reading the Vello manual, I am not sure when to activate or de-activate 'control lock switch". Should it be activated after turning -on the camera switch ? and when turning off the camera should it be turn-off after ?

A: The purpose of the Control Lock is to prevent any possible electrical damage to it or the camera. Therefore, make sure the grip Control Switch is in the L position whenever attaching/removing the grip or inserting/removing the battery. Otherwise you can leave it in the on position.

Q: 9. I bought the V2 to have 9FPS on my D850. I'm using it with a Kastar battery. It starts normally, I get 9fps with no problems. But all of a sudden, my shutter locks and the camera displays a ERR. I have to turn the camera off, on again, press the shutter release to release the shutter and then it starts working again, but this time the camera won't recognize the battery on the grip anymore, as it is discharged. If I replace the battery (I have two), the camera recognizes it again and 9fps returns, but for a short period of time. I have to fully charge the battery for it to work again. Would it be a problem with the grip or the battery? Does anyone have the same problem?

A: For camera abilities like getting the 9fps out of the d850 we highly recommend going with name brand products instead of third party.

Q: 10. I have read that Sony batteries are compatible with this product, is there any specific type of Sony batteries to recommend for this?

A: This monitor uses Sony NP-F style batteries. Atomos offers this Power Kit for Shogun/Ninja Inferno & Flame, B&H # ATOMPWRKT1, which has a pair of NP-F750 batteries and a charger. https://bhpho.to/2T5VQv0