The 500088 from MuxLab is an audio converter and downmixer offering simple setup and operation for converting a stereo or multichannel digital input to a stereo analog output in home theaters, demo rooms, and more. It converts an optical TOSLINK or digital coaxial input to stereo RCA analog outputs. It has digital coaxial and optical TOSLINK inputs and supports up to 24-bit / 96 kHz resolution.

It works with uncompressed 2-channel PCM (pulse code modulation) S/PDIF signals and compressed Dolby Digital and DTS surround formats. Configuration is easy; simply make the necessary connections (one optical TOSLINK cable included), power on the unit via the supplied 5 VDC power supply, then set the input switch to the desired input source.

Converts Digital Input to Analog Output    Downmixes Dolby Digital and DTS    Coaxial (S/PDIF) and TOSLINK Inputs    Stereo RCA Analog Outputs    Up to 24-Bit / 96 kHz Resolution    Supports Uncompressed Stereo PCM Signal    Supports Compressed Surround Formats    Selectable Input Source    Includes Power Supply and TOSLINK Cable

• Converts uncompressed stereo digital PCM signal (S/PDIF) to stereo RCA analog outputs
• Converts compressed surround Dolby Digital or DTS input to stereo RCA analog outputs
• Digital coaxial (S/PDIF) and optical (TOSLINK) inputs
• Stereo RCA analog outputs
• Up to 24-bit / 96 kHz resolution
• Selectable input source via switch
• Lock and power status indicators
• Includes power supply and TOSLINK optical cable

Related Questions and Answers

Q: 1. Does it come with Toslink to Toslink Optical Audio Cable?

A: According to the manufacturer's item details there is a 3-foot optical cable included.

Q: 2. How much audio power is delivered to earphone jack? Is this paralleled with the RCA jacks?

A: This is a passive box adding no amplification to the signal. The outpit to both the RCA and 3.5mm will be at line level.

Q: 3. Are both inputs active all the time? In other words can I plug in 2 analog inputs and play them out of the digital output? Thank you

A: Only one stereo analog input should be used to go to two stereo digital outputs.

Q: 4. what batteries are needed?

A: This Benchmark Remote Control Aluminum with Batteries for DAC2/3-Series/DAC1 HDR uses a cr2032 battery.

Q: 5. Will this mic work in digital mode, using only a usb-c cable, to connect to a DJI Osmo Action 3 or 4 cameras? Thanks

A: Yes, the Comica Audio VM10 PRO Shotgun Microphone will work with a USB-C cable to connect to a DJI Osmo Action 3 and 4 cameras.

Q: 6. What is the highest bitrate frequency for the toslink I/O and for the coax I/O - 96kHz or 192kHz?

A: The TOSLINK and COAX sample rate options for the Vanco PulseAudio Digital-Analog Audio Extender are 48k, 96k, or 192k at 16-bit, 18-bit, or 24-bit.

Q: 7. I noticed that the power supply comes separately - does that mean that it can alternatively be powered by a computer through the USB port? I am also unclear about the audio inputs. I have never seen that type of jack before...

A: No, it cannot be powered via USB. That is used to provide more comprehensive control, diagnostics, and upgrades to the unit from a PC or Mac. The audio input uses a 6 pin Phoenix connector, Wiring is done by inserting the connector provided with the unit. The wires will need to be stripped and inserted into the connector as described in the manual.

Q: 8. Dangerous Music CONVERT-8. Does it works under Windows?

A: Yes. There is a Windows USB driver available for download on the Dangerous Music website.

Q: 9. Does this come with a power adapter?

A: No

Q: 10. Is remote control included with device?

A: Yes, an IR remote control is included with the Key Digital 4x1 4K HDMI Switcher with Auto-Switching & Analog/Digital Audio De-Embed.