The cocoa E6 Directional Earset Mic, Medium Gain, with Detachable 2mm Cable and Hirose 4-Pin Connector for Audio-Technica Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a Hirose 4-pin connector for direct connection to an Audio-Technica ATW-T35, ATW-T75, ESW-T211, ATW-T601, ATW-T701, AEW-T1000, AEW-T1000a, or ATW-T1001 wireless bodypack transmitter for use with 600 Series, 700 Series, 1000 Series, 1200 Series, 4000 Series, 5000 Series, 7000 Series, or System 10 wireless systems.

For Vocals and General Speaking    Detachable 2mm Cable    Hirose 4-Pin (AN), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Which intervalometers works for Canon 6D Mark II

A: Any Canon 3-pin N3 intervalomter remote release would work with the Canon EOS 6D Mark II DSLR camera. Miops REMOTE PLUS TRIGGR w/CABLE-CANON 3 PIN B&H # MIOPSRPCC3P Canon Timer Remote Controller TC-80N3 B&H # CATC80N3 Vello Wireless ShutterBoss III Remote Switch with Digital Timer for Select Canon Cameras B&H # VERCW3C hahnel Captur Timer Kit for Canon DSLR Cameras B&H # HACTKC Vello ShutterBoss II Timer Remote Switch for Canon with 3-Pin Connection B&H # VERCC22 Phottix Taimi All-In-One Digital Timer and Wired Remote B&H # PH18300 Energizer Multi-Fit LCD Timer Remote Shutter Release B&H # ENSLCDU

Q: 2. Will this remote work with Nikon d300s?

A: Yes this would work on the Nikon D300s

Q: 3. Does this work with the Canon EOS R6?

A: Yes it is compatible with the R6.

Q: 4. Hi, Can this Shutter work for videos on a Nikon D850?

A: You can , you will have to assign the shutter release to start stop video

Q: 5. Will this also work with a Fuji x100f?

A: I have no idea.

Q: 6. Does this work with the original Vello Shutterboss Transmitter? They are both in 2.4GHz so the question is if Vello has been consistent from version to version with which frequency in the band each channel represents. Has anyone tried using an original Shutterboss transmitter with the Shutterboss II receiver?

A: The new receiver is completely compatible with the original transmitter. I have used the old transmitter simultaneously with both the old and new receivers with my Nikon bodies.

Q: 7. Will this work with Rebel SL2 ?

A: The impression you get is that Vello has distinctly different models for different cameras, but it appears that the only difference is the cable that connects to the camera. As long as your camera has an input for a remote shutter, and you pick the right cable, you should be good. I ordered one for my 80d, but I see that I can order a cable for my 7d and should be good for both.

Q: 8. how do I attach to omd em1 mark iii?

A: On the right-hand side, by the grip of your Olympus OM-D EM-1 Mk III next to the memory card door, is a 2.5mm sub-mini port for the male-end of the ShutterBoss II to attach into.

Q: 9. Does this work with the sony a6300?

A: Yes this will work on your Sony A6300.

Q: 10. does it work with D5100?

A: Yes. The D5100 has a DC-2 connector. Nikon calls it the accessory terminal.