The black E6i (Screw-On TA4F) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 1mm, and features a screw-on TA4F connector for compatibility with Beyerdynamic / Mipro transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    Screw-On TA4F Connector    1mm Diameter Cable    Black Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 1mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Will this Gitzo ball head work on Gitzo Monopod?

A: Yes it will work. These ball heads take a 3/8 screw, so you just need to reverse the monopod screw to use the head.

Q: 2. Hi, is it good also for Salut C lenses?

A: Yes. The FotodioX Pro Lens Mount Adapter with Generation v10 Focus Confirmation Chip for Kiev 88 Screw-Mount Lens to Canon EF or EF-S Mount Camera will also work with Salut C lenses.

Q: 3. I am wondering if RSS L Plate for a9, a7rIII or 5D IV will fit this Gitzo GH1382TQD? I am hearing that the Gitzo has safety pin which takes only Gitzo specific lates?

A: All B&H customers using this head report it accepts Arca-Swiss plates without issue.

Q: 4. Would a Canon 5d Markiii fit on this?

A: Yes, this one will fit any full frame DSLR, but it depends on a lens you are going to use. I use it with Nikon D700 or D800 and Nikon 70-200mm VRII as a maximum. This body/lens combo weighs around 2.5 kg (PG-01 load capacity is 3.6 kg/8 lb), but you should be careful how far from the tripod centre you will push them on a nodal slide. Although, primary target is a mirrorless camera user, I like how sturdy, but light and small PG-01 is, as well as its price in comparison to PG-02. I use quite long nodal slide with it (RRS MPR-192), as for example, the entrance pupil for mentioned lens (no parallax point) at 200mm is behind the camera flange and you need to have that lenght of a slide to push everything forward to the far end. I hope this can help.

Q: 5. Is it possible to use this wireless remote and a hot shoe flash at the same time? They both appear that they need to connect to the hot shoe, but how do I use both the remote and flash on one camera? I have a Nikon D90.

A: The ShutterBoss receiver doesnt need to be on the hot shoe in order to function: it simply needs to be plugged into the accessory port of the D90. You would want to use some Velcro, tape, or something to attach the receiver to the camera or tripod, though, so it doesnt hang from the cord.

Q: 6. Will the Vello ShutterBoss Version II Timer remote let me start and stop movie recording. I need to remotely control slow motion clips while on my treadmill. My Sonys are RX10ii , A350, and A55?

A: Yes, there is a kit that will allow you to control the Sony Cyber-shot DSC-RX10 II wirelessly for video and stills.It is Sony RMT-VP1K Wireless Receiver and Remote Commander Kit B&H # SORMTVP1K MFR # RMT-VP1K.

Q: 7. This Gitzo travel ball head is too sticky and not smooth like my old Promaster cheapo ball head. Is there anyone else with this issue?

A: This head is very good and should not at all be sticky. Check the knobs and see if different tightening positions make the difference.

Q: 8. Hi, Is this (or any remote?) Compatible with the CANON.Powershot sx510??

A: No. The SX510 does not have a connector port to accept a remote shutter release.

Q: 9. I have a Peak Design arcs-Swiss type plate would this head fit it?

A: I have one square Peak Design plate with a screw in the middle of the plate. It does not fit my Gitzo 1385TQD because the screw has 14mm diameter and it touches the safety pin. Solution (if you want to keep the safety pin): use a different screw with a small head similar to the B107 Screw (1/4"-20 Thread) that locks with M2.5 Hex Key. Another solution is to find a screw with a low profile head. By the way, the JOBY Ballhead X plate and JOBY QR Plate 5K can be used thanks to low profile screw head.

Q: 10. dose this product work with the d5200?

A: This Shutterboss remote would not be compatible with the D5200. For the D5200, you would need the Shutterboss Version II Timer Remote Switch for Nikon with DC2 connection (B&H # VERCN22).