The beige E6i (1/8" (3.5mm) Locking) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 1mm, and features a 1/8" (3.5mm) locking connector for compatibility with Sony transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    1/8" (3.5mm) Locking Connector    1mm Diameter Cable    Beige Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 1mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Will this device power my camera simultaneously...?

A: No, it does not power the camera at all.

Q: 2. Would this sync the shutter and flash on a multiple camera setup using a wireless HSS flash system like Godox? I tried using a wireless Godox trigger/receiver but the flash does not sync with the shutter across multiple cameras.

A: I contacted Vello Gear concerning your inquiry. According to Vello Gear, they state if the Vello Wireless ShutterBoss II Receiver is connected to the remote terminal of your camera via a remote shutter release cable, and both the ShutterBoss II receiver and the handheld ShutterBoss II transmitter are set to the same channel, then yes, it may trigger multiple cameras whose receivers are also set to the same channel. However, that being said, the ShutterBoss II transmitter and receiver are not compatible with Vello's Freewave flash transmitters/receivers, nor is it compatible for use with Godox flash transmitters/receivers, and will not wirelessly trigger Godox products or flashes connected to Vello Freewave remotes.

Q: 3. Will it work with the Nikon Z7 II?

A: Yes Vello ShutterBoss II Timer Remote Switch for Nikon with DC2 Connection is compatible with the Nikon Z7 II.

Q: 4. Will this work with Pentax 645Z, K1 and K3 iii?

A: Yes, the Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection would be compatible for use with the Pentax K-1, 645Z, and K3 III DSLR camera.

Q: 5. cord length?

A: The Cable Length is: 2.7' / 85 cm

Q: 6. how long is the attached cable ?

A: The attached Cable Length is 2.7' / 85 cm

Q: 7. does this work with z 5

A: Yes, the Vello Shutterboss II with DC2 connection works with the Nikon Z5.

Q: 8. Can the Vello Shutter Boss II be used to start and stop video recording?

A: If you can assign the shutter button to start/stop video then yes

Q: 9. Does it work with DSC-W800? https://a href= http://www.bhphotovideo.com/c/product/1029529-REG/sony_dsc_w800_b_cyber_shot_dsc_w800_digital_camera.html target= _blank www.bhphotovideo.com/c/product/1029529-REG/sony_dsc_w800_b_cyber_shot_dsc_w800_digital_camera.html/a

A: This is Designed For Use With: B+W 403 Benro Truenight FotodioX Pro Automatic Macro Extension Tube GoGORIL Gohandle Kenko DG Extension Tube Letus35 Talon LockCircle 6500NY Opteka CXS-25 Seercam CUBE 6x SmallRig 1889 SmallRig 2081 Sony Alpha A3000 Sony Alpha A5000 Sony Alpha A5100 Sony Alpha A6000 Sony Alpha A6100 Sony Alpha A6300 Sony Alpha A6400 Sony Alpha A6500 Sony Alpha A6600 Sony Alpha A68 Sony Alpha A7 Sony Alpha A7 II Sony Alpha A7 III Sony Alpha A77 II Sony Alpha A7R Sony Alpha A7R II Sony Alpha A7R III Sony Alpha A7R IV Sony Alpha A7S Sony Alpha A7S II Sony Alpha A7S III Sony Alpha A9 Sony Alpha A9 II Sony Alpha A99 II Sony Alpha NEX-3 Sony Alpha NEX-3N Sony Alpha NEX-5 Sony Alpha NEX-5N Sony Alpha NEX-5R Sony Alpha NEX-5T Sony Alpha NEX-6 Sony Alpha NEX-7 Sony Alpha NEX-C3 Sony Alpha NEX-F3 Sony Alpha a1 Sony Alpha a6500 Sony Cyber-shot DSC-HX400V Sony Cyber-shot DSC-HX99 Sony Cyber-shot DSC-RX10 Sony Cyber-shot DSC-RX10 II Sony Cyber-shot DSC-RX10 III Sony Cyber-shot DSC-RX10 IV Sony Cyber-shot DSC-RX100 II Sony Cyber-shot DSC-RX100 III Sony Cyber-shot DSC-RX100 V Sony Cyber-shot DSC-RX100 VII Sony Cyber-shot DSC-RX1R II Sony ZV-1 Thom Alpha A6300 Tilta ES-T16 Tilta TA-BSP2-15 Tilta TA-T17-A Tilta TA-T17-B Tilta TA-T17-C-G Tilta TA-T17-FCC UURig R006 Vello EXT-SFED2 Vidpro CA-22 Viltrox Automatic Extension Tube Wimberley AP-610 Wimberley AP-611 YELANGU C5 YELANGU FIIL-YLG-206 YELANGU FIIL-YLG-CA7 Yasuhara Nanoha

Q: 10. Intervalometer

A: Yes Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection is an intervalometer.