Keep your Aquatica D3s/D3x/D3 underwater housing watertight with this O-Ring Maintenance Kit. For complete camera compatibility information, please see below. The kit contains a full set of replacement O-rings for the enclosure, i.e., one large main seal and two smaller seals for the port and extension, along with a container of silicone lubricant to keep the rings from drying out and cracking.

Aquatica's neoprene O-rings are built to withstand extreme temperatures and are highly resistant to harsh solvents. After changing any O-ring, a pressure test or immersion without a camera inside the housing is mandatory. Failure to perform this test could result in serious damage to your camera and lens if the O-ring is improperly installed.

1 Main Housing O-Ring    2 Port/Extension O-Rings    1 Container of O-Ring Lubricant

Nikon D3s, D3x, and D3

Related Questions and Answers

Q: 1. What is a an example of a typical power bank? Also, any recommendations for a small table top tripod?

A: Studio Essentials Tabletop Light Stand (18") BH #STLS301

Q: 2. Does this have to be connected to power?

A: Yes, in order to use the ring light the Movo Photo VGC-3 3-Arm Selfie Ring Light Kit BH #MOVGC3 has to be connected to power.

Q: 3. Does this eyepiece for Nikon also fit the new D750 DSLR?

A: I really do not know?

Q: 4. Do you still need this if you use a nikon DK17M? They look a similar shape and size.

A: Yes. You have to unscrew and remove the existing eyepiece from your camera and replace it with the Think Tank Photo EP-NSI Hydrophobia Eyepiece for Nikon D2/D3/D4/D5/D700/D800 DSLR Cameras, B&H # THEPNSI. From there, you may then screw your Nikon DK-17M Magnifying Eyepiece for Select Nikon Cameras into the threads on the front of the Think Tank eyepiece. The Think Take Eyepiece is required to use the Hydrophobia Rain Cover, but it has threads onto which you may connect the Nikon eyepiece.

Q: 5. Can this light be mounted to a DSLR or mirrorless hotshoe?

A: If you use the BH #RESACS14M with the Oben TTVLK-8 Tripod Vlogging Kit with Ring Light (8") BH #OBTTVLK8 it could be attached to a camera hotshoe.

Q: 6. Is the smartphone holder detachable?

A: No, the smartphone holder on the Movo Photo VGC-3 3-Arm Selfie Ring Light Kit BH #MOVGC3 is not detachable.

Q: 7. Does this flash work with Canon EOS 250 D?

A: Yes, ETTL-II works with the SL3.

Q: 8. Will this fit Nikon D500? Thanks

A: Yes it will, I use it on my D5 and have used it on a d810 and on a F5 (film camera) so all Nikon cameras with round eyepiece will work fine with this, including your D500

Q: 9. Does this fit Niko D6?

A: Yes, the D5 and D6 take the same eyepiece.

Q: 10. Can this be attached to an external monitor? If not, how can I use it for Zoom calls via laptop instead of cell phone?

A: By placing it on the side of your laptop or get a taller table stand BH #STLS301or BH #SMTTBP18