Lilliput's 663/O/P2 7" LCD On-Camera HDMI Monitor is an on-camera monitor offering 1280 x 800 resolution with 400 nit brightness and an 800:1 contrast ratio. The monitor allows you to analyze focus, exposure, and other characteristics with False Color, Pixel-to-Pixel, and Histogram. It supports both NTSC and PAL compatible signals with HDMI, Component, and Composite inputs. This monitor also features an HDMI output, allowing you to feed the monitor and send the video signal along an HDMI infrastructure. It also features both a built-in speaker and headphone jack.

The four front panel buttons and four rotating knobs can be assigned to specific functions that allow you to call up often-used menu functions. You can power the monitor by using the included battery plates or the 4-pin XLR connector. The included 4-pin XLR power cable features a barrel connector and three pigtail cables for connecting to a tally system. The monitor features a tally indicator on the front of the monitor. An assortment of supplied accessories includes a Sony L-type and Canon LP-E6-type battery plates. The monitor incorporates a 1/4"-20 threaded mounting hole on the bottom and on each side, and the included sun hood attaches via hook and loop fastener to a removable sun hood attachment frame. A V-mount and Gold mount plate adapter allows you to mount optional V-mount or Gold mount battery plates.

7" 1280 x 800 IPS LCD Display    800:1 Contrast Ratio    HDMI, Component, Composite Inputs    HDMI Loop Output    Peaking, False Color, Histogram    Customizable Front Panel Buttons    Metal Chassis Sun Hood & Tally Light    3 x 1/4"-20 Threaded Mounting Holes    Sony L & Canon LP-E6 Battery Plates    V-Mount & Gold Mount Plate Adapter

The front panel buttons and knobs can be customized to call up often-used menu functions.
F1 to F4 Buttons:

• Center Marker
• Check Field
• Color Bar
• Camera (format selection)
• PIP
• Flip
• Zoom
• Pixel-to-Pixel
• Freeze
• Input
• Underscan
• H/V Delay
• Peaking
• False Color
• Exposure
• Histogram

• Contrast
• Brightness
• Saturation
• Tint
• Volume
• Sharpness
• Back Light

• Histogram
• 1:1 Pixel-to-Pixel
• Picture-in-Picture (for when the HDMI and Composite inputs are used simultaneously)
• H/V Delay
• Underscan
• Center Marker
• Zoom (up to 8x)
• False Color
• Peaking
• Color Bar
• Image Flip
• Freeze Input
• Adjustable color temperature

Peaking highlights the sharpest (most in focus) areas of the image with a color outline. The monitor features two modes, monochrome, and color. The monochrome mode shows the image in black and white with the red peaking outline, and the color peaking mode shows the image in color with a red peaking outline.

The False Color feature provides under/over luminance warning by presenting the image as a series of color values representing exposure.

The waveform provides an objective evaluation of your video signal. It displays the brightness of your image on an IRE scale, allowing you to see if your image will clip, and where your black levels are.

The Histogram provides a graphic depiction of how many pixels in your image are at each level between black and white. This provides you exposure information so you can objectively judge how much of your image is clipping, falling into the shadows, or being captured faithfully.

The vectorscope displays the signal on a graph so you can check the phase of your colors. The vectorscope function also verifies and checks the overall tint and hue of an image.

1:1 pixel-to-pixel mapping allows you to look at parts of your image without any scaling, so you can see the actual detail and not be fooled by scaling artifacts.

This mode allows you to see the video signal outside the active picture area. Settings include Off, H/V Delay, H Delay, and V Delay.

Allows you to display an image with lower resolution than the screen with either a black border around the image or fill the screen entirely.

Related Questions and Answers

Q: 1. Is this a good choice for real estate interior shots with 5D mark 3 and 17MM T/S lens?

A: Yes.

Q: 2. Would this work for the sony RX 10II camera?

A: yes

Q: 3. How long the battery will last?

A: The package comes with F970 and LP-E6 battery plates but it doesn't come with battery ,thanks !

Q: 4. I have a Sony PXW Z150 Camcorder & would like a HD Monitor with a hood which makes it easy to see & focus when outdoors. I would like Zebra function also. Limited budget - any suggestions?

A: Lilliput also offers B&H # LI5DIIOP which has Zebra patterns.https://bhpho.to/2zwrDfa

Q: 5. Hi, I want to know if this monitor works with a Panasonic AG-HPX370P camera (ENG type)?

A: Yes this monitor will work with the HD/SDI output of the 370.It is a great little monitor but I find the color rendition runs a bit green.

Q: 6. I have a model F970 battery mount. What is the best battery for this mount?

A: Thank you for your inquiry ,please use SONY L series battery such as F970,F950,F550 ,the F970 can last longest than other models .thanks Joanna Chen

Q: 7. I got Dji fantom 2vision=, nied monitor ?

A: The DJI Phantom 2 Vision works with an IOS or Android smart phone for live monitoring.

Q: 8. What all comes in the box?

A: 12v adapter ,gimbal stand ,suitcase , F970 and LP-E6 battery plate,battery plate mount ,hot shoe mount ,Mini HDMI cable ,XLR with tally connector cable ,sun hood and user manual.

Q: 9. Anyone have experience using this monitor with the Blackmagic Cinema Camera? And words of wisdom would be much appreciated!

A: While we have not reviewed these two products together, we feel most confident they play together well.The camera/monitor issue that is most common is whether the camera puts out a signal that the monitor can support. This Lilliput reads every type of signal there is so you will be good.

Q: 10. It is possible to manually add the SDI connectors?

A: The Lilliput 663/O/P2 7" LCD On-Camera HDMI Monitor has other versions of the similar monitor with SDI included from the same product mold. This specific version cannot have the SDI added.