Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And 3.5mm Connector For Azden Wireless Transmitters (cocoa)
- Product Code: ga233642
-
The cocoa E6 Directional Earset Mic, Highest Overload, with Detachable 2mm Cable and 3.5mm Connector for Azden Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.
The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.
In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm connector for direct connection to an Azden WM-PRO, WLT-PRO, 32BT, WM22, or 31LT wireless bodypack transmitter.
For Vocals and General Speaking Detachable 2mm Cable 3.5mm (ZP), See Description 30 Hz to 15 kHz Frequency Response Includes Cardioid & Hypercardioid Caps Headroom for Strong Vocals Windscreen Cable Clips Carrying Case
Key Specs | |
---|---|
Compatible Transmitters | Azden: 31LT, 32BT, WLT-PRO, WM-PRO, WM22 |
Polar Pattern | Cardioid / Hypercardioid |
Frequency Response | 30 Hz to 15 kHz |
Maximum SPL | 145 dB |
Sensitivity | W7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2) |
Analog Output | 1x 1/8" / 3.5 mm TRS Male |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Microphone | |
Compatible Transmitters | Azden: 31LT, 32BT, WLT-PRO, WM-PRO, WM22 |
Polar Pattern | Cardioid / Hypercardioid |
Included Tone/Pattern Caps | Hypercardioid, Cardioid |
Performance | |
Frequency Response | 30 Hz to 15 kHz |
Maximum SPL | 145 dB |
Sensitivity | 0.6 mV/Pa |
Sensitivity | W7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2) |
Equivalent Noise Level | 39 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x 1/8" / 3.5 mm TRS Male |
Cable Length | 5' / 152.4 cm |
Cable Diameter | 0.08" / 2 mm |
Power | |
Power Sources | Plug-In Power |
Operating Voltage | 1 to 2 V |
Physical | |
Color | Cocoa |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Weight | 0.07 oz / 2 g |
Packaging Info | |
Package Weight | 0.5 lb |
Box Dimensions (LxWxH) | 10 x 10 x 2" |
The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.
The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.
The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.
The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.
Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.
An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.
For strong vocals.
Related Questions and Answers
Q: 1. I was wondering if this Sony RM-VPR1 Remote Commander is compatible with the Sony A9 Camera? Thank You!
A: Yes, it is.
Q: 2. Does this work with the Sony FX6?
A: No it will not connect to the camera's available inputs.
Q: 3. Will this work with Sony alpha a7II?
A: I would expect it would. I've used it with an RX10iii and a6500. With a power zoom lens the zoom function works though not as smoothly as with the on-camera or lens zoom switch. Overall l'm very happy with this remote.
Q: 4. does this remote have a continuous shutter release mode for a6000/a7r? and if it does not, is there one you can recommend? (wired or wireless ok)
A: The Sony RM-VPR1 does not have a continuous mode. Unfortunately, this is the only remote currently compatible with the Sony A7R and A6000.
Q: 5. will this work on EM-1?
A: I'm sorry, no. The correct cable is listed below; https://bhpho.to/36xWFie
Q: 6. Hi, is the zoom control pressure sensitive. I would like to know if I can control the zoom speed depending on how much I press on the buttons. Thanks!!
A: Yes the zoom control is pressure-sensitive.
Q: 7. I have a Sony a3000. Looks to work with this camera. Can you use it as a intervalometer. Would like to do some Timelapse Stuff?
A: No, the Sony RM-VPR1 does not have a timelapse function.The only one I am aware of that has time laps function and works with the a3000 is theVello Wireless ShutterBoss II Remote Switch with Digital Timer for Sony Multi-Terminal B&H # VERCWIIS2 MFR # RCW-II-S2.It can be used wired or wireless.
Q: 8. does this work with the sony HXR-NX80?
A: David, I have the Sony DXC HX50V and this wired controller works as advertised. My camera is pretty close to yours and I'm sure no difference in performance exists due to model differences. I feel like you could buy with confidence.
Q: 9. Does it support zooming on Sony RX100? It seems that it only supports Sony RX100 II.
A: Unfortunately, the RM-VPR1 Remote Control is not compatible with the RX100. The RX100 does not have the interface/accessory port needed to use a remote shutter release.
Q: 10. Will it work on a Sony DCR-SX45 digital video camera recorder?
A: My practice for this kind of question is to go to the Sony website and search for the DCR-SX45 digital video camera recorder. When you find the product page for the DCR-SX45, look again for the available accessories for the DCR-SX45. If the RM-VPR1 is listed as an accessory, then it is very likely that the RM-VPR1 will work with the DCR-SX45. But a caution: just because the 'VPR1 will work with the 'SX45, does not mean that All of the functions available on the 'VPR1 will be usable on the 'SX45. Or, you could just Sony's help line.
Top Bestselling Products
Products You May Like
Hedd Type 20 Mk2 3-way 900w Active Studio Monitor (right, Black)
$7,197.00 $9,859.89
Kupo 6" Sausage Camera Marker (purple)
$47.85 $72.25
Aten Vb100 Vga Booster
$179.85 $244.60
Kendall Howard Vented Component Shelf (1u 12" Deep)
$146.25 $222.30
Elite Screens Spectrum Series 125" Acousticpro Uhd Projection Screen
$2,294.85 $3,235.74
Trijicon Mro Quick Release 45° Offset Mount
$507.00 $633.75
Long Weekend Everyday Zip Pouch (small)
$45.00 $67.05
Arkay Premium Stainless Steel Photo Processing Sink(18x48x10")
$5,777.85 $8,204.55
Sony C-80 Unidirectional Studio Condenser Microphone
$1,499.97 $2,249.95
Premier Imaging Decor Satin Bright White Canvas (60" X 100' Roll)
$960.00 $1,296.00
Countryman E6 Flex Earset Microphone (beige)
$2,097.00 $2,789.01
Neewer Ns007 Ring Light Diffuser For Rp18b Pro
$59.97 $93.55
Impact Eyh Lamp (250w, 120v)
$44.97 $62.96
2n Ip Force 1-button Intercom System With Camera And Keypad
$4,713.00 $6,786.72