The beige E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and 3.5mm Locking Connector for Nady Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm locking connector for direct connection to a Nady UB10, UB16, WLT14, or WLT15 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3.5mm Locking (NL), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. A6100 Can I connect a wired shutter release remote (usb port) and a 4K capture device (HDMI) simultaneously? I am looking to stream in 4K and remote trigger a full resolution image capture.

A: Yes a remote control connected via USB will work simultaneously with an item connected via HDMI in the camera.

Q: 2. will this work with the newest just released, sony cyber dsc-hx400??

A: Yes, the RM-VPR1 is compatible with the DSC-HX400V.

Q: 3. Is the shutter a two-step button, like the camera's shutter?

A: Yes. I use it to half press to bring up manual focus

Q: 4. Will this work with Sony alpha a7II?

A: I would expect it would. I've used it with an RX10iii and a6500. With a power zoom lens the zoom function works though not as smoothly as with the on-camera or lens zoom switch. Overall l'm very happy with this remote.

Q: 5. Will it work on a Sony DCR-SX45 digital video camera recorder?

A: My practice for this kind of question is to go to the Sony website and search for the DCR-SX45 digital video camera recorder. When you find the product page for the DCR-SX45, look again for the available accessories for the DCR-SX45. If the RM-VPR1 is listed as an accessory, then it is very likely that the RM-VPR1 will work with the DCR-SX45. But a caution: just because the 'VPR1 will work with the 'SX45, does not mean that All of the functions available on the 'VPR1 will be usable on the 'SX45. Or, you could just Sony's help line.

Q: 6. Is this trigger compatible with Sony a7iv?

A: Yes. As well with the other Sony E-mount units a1, a9 II, a9, a7R IV, a7R III, a7R II, a7R, a7s III, a7S II, a7S, a7 III, a7 II, a7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1.

Q: 7. does this work with the sony HXR-NX80?

A: David, I have the Sony DXC HX50V and this wired controller works as advertised. My camera is pretty close to yours and I'm sure no difference in performance exists due to model differences. I feel like you could buy with confidence.

Q: 8. Can this control the PZ zoom lens on a Sony A5100?

A: I use it in a Sony A6000. It controls the zoom before you shoot. But, when the camera is capturing video, the camera has no power to zoom, I mean, the zooming gets extremely slow, absolutely useless. You will have to use the control on the lens.As the 5100 uses the same platform and same battery, I guess you will have the same problem. However, as a cable release for still images (or video without the zoom control), it is very good and comes with the right adapter to fit the camera.

Q: 9. This will control the shutter speed. Are you able to control the lens aperture too? Thank you.

A: Unfortunately, aperture control is not available when using the Sony RM-VPR1.

Q: 10. will this work on the fx30?

A: Yes. The following shutter release will work with the FX30