You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6i Omnidirectional Earset Headworn Microphone (1/8" (3.5mm) Connector, Cocoa)

Countryman E6i Omnidirectional Earset Headworn Microphone (1/8" (3.5mm) Connector, Cocoa)
  • Product Code: ga233719
  • Availability: In Stock

$1,619.85 $2,445.97

The cocoa E6i (1/8" (3.5mm)) from Countryman is a miniature, omnidirectional, earset condenser microphone designed for accurate voice reproduction (speaking and singing) and near-invisible appearance in theater, concerts, lectures, houses or worship, and more. It features a water- and wind-resistant capsule that delivers a 20 Hz to 20 kHz frequency response. The omnidirectional polar pattern picks up sound from all directions and should be used when feedback is not common.

The 5’ detachable cable has a diameter of 1mm, and features a 1/8" (3.5mm) connector for compatibility with Azden transmitters. The E6i offers a flexible boom for versatile placement. The three protective caps yield different high-end frequency presence. The supplied windscreen protects the condenser element, and reduces plosives and wind noise. Cable clips and a carrying case are included.

For Speaking and Vocals on Stage and TV    Omnidirectional Polar Pattern    20 Hz to 20 kHz Frequency Response    1/8" (3.5mm) Connector    1mm Diameter Cable    Cocoa Color    Includes Protective Caps and Cable Clips    Includes Windscreen and Carrying Case

Key Specs
Compatible TransmittersAzden: WM-PRO, WLT-PRO, 32BT, WM22, 31LT
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x 1/8" / 3.5 mm TS Male
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAzden: WM-PRO, WLT-PRO, 32BT, WM22, 31LT
Polar PatternOmnidirectional
Included Tone/Pattern Caps+0 dB Flat, +4 dB Bright, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
Sensitivity2 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x 1/8" / 3.5 mm TS Male
Cable Length5' / 1.52 m
Cable Diameter0.04" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear section. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 1mm diameter cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i sensitivity response is optimized to accurately capture both speech and vocal performances without noise and distortion.

Related Questions and Answers

Q: 1. Does this have a battery?

A: No - this unit is powered by the camera

Q: 2. will the rs-s2ll work with the sony a7 ?

A: I believe it does. I use it with the Sony a6000, but I believe they both have the same multi-connector so it will work.

Q: 3. is it compatible with Sony HDR cx240 camcorder?

A: No , for that camera you will need Sony RM-VPR1 Remote Commander with Multi-Terminal Cable B&H # SORMVPR1

Q: 4. Will this work on the Sony RX10 mk 3?

A: I have a Vello wired remote switch which looks like the one displayed though i can't say for sure that it's the RS-S211. The one i have works with my Sony RX10 mk3

Q: 5. Will this work on a Sony alpha a6700? It's listed under "accessories" on the B&H website, there is no matching camera port

A: Unfortunately, the Vello RS-S2II Wired Remote Switch for Select Cameras with Sony Multi-Terminal Connector is not compatible with the Sony A6700. I will ask the B&H web department to remove it from the accessories. Thank you for letting us know.

Q: 6. Can it trigger video recording?

A: have not tried it on video.

Q: 7. Does this work with Sony a7 III?

A: Well i have the a7riii and it works with that so probably it is working with the a7iii

Q: 8. does it work with sony a7711?

A: I you mean the A7II, yes the remote switch works fine. I use it all the time.

Q: 9. Will this work on sony a6300?

A: It works on my a6000, but I do not have the A6300.

Q: 10. Does it work with sony a3500 and does it have BULB mode?

A: Yes. This works with the Sony Alpha a3500. For Bulb one can press the button and slide it forward to lock it for long exposures.

25/09/2024

Honestly, I was really skeptical about making this purchase. I will generally always buy Nikon genuine products over 3rd party vendors. In this case, I just couldn't see spending the money on a remote shutter release that cost about 3 times as much! And yes, there are other places that sells them less but buyer beware... I learned my lesson with counterfeit Nikon products. Plus B&H customer service has been outstanding helping me and answering any question I have. I don't buy from anyone else. I just used this product on a commercial property I was shooting for a client. Never had any issues and it worked flawlessly. And consider this, it does have a power on/off button and works without batteries in just shutter release. If you have money to burn and don't care how much you spend, or how many times you have to replace the batteries, go for the Nikon. But if you want a great 3rd party shutter release cord then by all means get this one. You will not be disappointed.

5
22/09/2024

Great for long exposure night shooting. Having the timer built in is a big plus.

5
18/09/2024

I have just started to do night photography with long shutter speed. It work well for this and I have not had any issues. With the price a great product.

5
18/09/2024

I have just started to do night photography with long shutter speed. It work well for this and I have not had any issues. With the price a great product.

5
09/09/2024

I wanted to do some time lapse photography and found the Shutterboss Version II Remote Timer Switch for my Canon 7d. I tried it when I received the remote timer and it worked great. I was able to capture a sequence of shorts for the interval I was looking for.

5
27/08/2024

A great shutter release that is a must-have for anyone getting into long exposure photography.

5
27/08/2024

A great shutter release that is a must-have for anyone getting into long exposure photography.

5
18/08/2024

Wanted to start doing some timelapse photography and shopped B&H for products that would work with my Canon 6D. I normally stick with only Canon accessories for my cameras but the Canon Timer seemed a bit pricey so I took a chance and tried the Shutterboss. It works great, no regrets on my decision. It's got every feature I need to do timelapse work. The only thing of note is that it doesn't snap/pop into the Canon body like Canon's own connectors do. I have a Canon remote trigger and you get a reassuring snap when you connect it to the camera. The Shutterboss connector does not do this, it's kind of a muddied feel when you connect it to the camera.

5
18/08/2024

Wanted to start doing some timelapse photography and shopped B&H for products that would work with my Canon 6D. I normally stick with only Canon accessories for my cameras but the Canon Timer seemed a bit pricey so I took a chance and tried the Shutterboss. It works great, no regrets on my decision. It's got every feature I need to do timelapse work. The only thing of note is that it doesn't snap/pop into the Canon body like Canon's own connectors do. I have a Canon remote trigger and you get a reassuring snap when you connect it to the camera. The Shutterboss connector does not do this, it's kind of a muddied feel when you connect it to the camera.

5
18/08/2024

Just simplifies time-lapse which is what I use it more for than anything else.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Nanuk 903 Hard Case With Foam (orange)

$123.93 $197.05

Audix Vx10 - Handheld Condenser Microphone

$1,887.00 $2,566.32

Rode Rc2 Hard Plastic Case

$117.00 $143.91

Micw M215l Omnidirectional Condenser Microphone

$1,137.00 $1,660.02

Louroe Verifact L-dt Condenser Microphone

$539.85 $777.38

Akg Hard Case For Two C414 Microphones

$171.63 $242.00

Products You May Like

Kawai Wb-102 Padded Piano Bench (rosewood)

$597.00 $716.40

Pelican Padded Divider Set For 1560 Cases

$600.00 $792.00

Countryman Isomax 2 All Purpose Microphone

$1,044.00 $1,409.40