The cocoa E6 Omnidirectional Earset Mic, Highest Gain, with Detachable 2mm Cable and Mini 4-Pin Connector for MIPRO Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a screw-on mini 4-pin connector for direct connection to a Mini MIPRO 4-pin model wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    Mini 4-Pin (MN), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Can this be mounted on a tripod or monopod?

A: The DJI Mini 3 Gimbal Stabilizer has a 1/4 20" receiver on the bottom of the handle for mounting purposes, including a monopod.

Q: 2. Is this gimble good for hyperlapse with Sony A74?

A: The DJI RS 3 Mini Gimbal Stabilizer is a great choice for hyperlapse production with the Sony A7IV.

Q: 3. Is there anyway to tether a remote control for this ronin? such as the smallrig or even DJI tether model?

A: The DJI RS 3 Mini Gimbal Stabilizer (B&H# DJRS3M) does not currently include any sort of physically tetherable remote control, nor is there any available as an accessory at this time. However, it is possible to use the DJI Ronin app with Bluetooth for wireless camera control.

Q: 4. Will it work with blackmagic pocket g2?

A: The payload for the DJI RS3 mini is 4.4lbs, so the lensing and accessory weight will need to be kept on the lower side for best performance.

Q: 5. Will this fit an ikan VL35?

A: Yes, The Sachtler SA1009 Mini Hood should work with the Ikan VL35 display model.

Q: 6. hi there I know this will work for Canon r6 with 24-105 or AN RF 35 1.8. eill the fujix100v work? It might be too light Thanks

A: Yes, the FUJIFILM X100V Digital Camera (Silver) is compatible with the DJI RS 3 Mini Gimbal Stabilizer.

Q: 7. I would mainly use this gimbal for 2-axis time lapses. Is it possible to sync my camera to the unit via a shutter cable?

A: Yes, the DJI RS 3 Mini Gimbal Stabilizer is capable of triggering the shutter during a time-lapse maneuver when the appropriate DJI control cable is used for the camera.

Q: 8. Would this fit inside the Peak Design Everyday Sling 5L bag?

A: No, a bag like the Peak Design Everyday Sling (5L, Black) that offers the interior dimensions of 11" x 6.75 "x 2.5" won't appropriately accommodate the measurements of the DJI RS 3 Mini Gimbal Stabilizer, which is 12.7" x 7.7" x 3.9" when folded (excluding the mini tripod) and 7.1" x 6" x 11.7" when unfolded (excluding the mini tripod).

Q: 9. Will this fit a gh4?

A: Don't think so. We used for Sony FS7.

Q: 10. Can I input and output different signals at the same time with this?

A: You have 1 SDI input and 2 SDI outputs. You can be taking a av feed from that while you output a different source like a youtube video or graphics or some other source. I've used programs like wirecast or OBS to accomplish this. However, the 2nd output is just a loop of the 1st output so you can't output 2 different things at the same time as it is natively.