The DS-TPR2A Active RCA Stereo Audio Output over Dual RJ45 Receiver Module from RDL is a CAT5 to RCA phono receiver module. The The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DS-TPR2A module features two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.

This module receives signal from only two cable pairs, so the DS-TPR2A module has a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

The DS-TPR2A may be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DS-TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The DS-TPR2A unit can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.

Two unbalanced -10 dBV phono jack audio outputs

L (Left) output from pair B, R (Right) from pair C

Signal and Power pair pass-through on RJ45s

Remote powering through twisted pair cable

Fused local power feeds all connected modules

Local power input on terminal block

Blue LED indicates module is powered

Daisy-chain with additional format-A receivers (sold separately)

Precision active balanced circuitry

Related Questions and Answers

Q: 1. Fully compatible with the Nikon Z fc?

A: This has the Nikon F mount (the one used by DSLR cameras) you will need a Nikon Z to Nikon F adapter in order to use these lenses on the Nikon Z fc

Q: 2. How is "defocus smoothing" different from an apodization filter? Does defocus smoothing slow the lens down in all apertures, or just wide open?

A: The defocus smoothing helps balance the front bokeh with the rear bokeh. With regular lenses, there is often more blur in the front and less in the rear. The focus speed cannot be determined yet since the lens has not yet shipped. The testing of the pre-production model did not show any obvious slowness in the focusing.

Q: 3. How is the warranty/exhange works for the set? I read on the other sources like Amazon that some of the Rokinon lens samples are soft. If such a issue happend can I replace just one lens or will need to replace full set which is obviously may come to the issue with another lens in the set again.

A: It is our understanding Rokinon would require the set to be returned.

Q: 4. Do you recommend on a gimbal? Do I need to rebalance when I change the lens?

A: Yes a gimbal may need to be rebalanced depending on which lens is being used on the camera.

Q: 5. How long does it take to charge 100%? a reference

A: That will depend on the charger being uses, but with a standard charger it should take 4 hours or so to fulyl charge this battery from empty.

Q: 6. do the have f stop on them?

A: No, the Rokinon 24, 35, 50, 85mm T1.5 Cine DS Lens Bundle for Canon EF Mount are with T-stops.

Q: 7. Will all the lenses fit on the Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to Select Micro Four Thirds-Mount Cameras?

A: Yes, these lenses all cover a full frame sensor.

Q: 8. Does this set come in a box. More like a case that I can put all the lens at once and keep it protected or I will have to buy a case separately. If it doesnt come with a case. Any suggestions on affordable case to keep on protect the lens?

A: No case. I bought this: Works great.https://a href= http://www.bhphotovideo.com/c/product/248295-REG/Canon_6229A003_Deluxe_Backpack_200_EG.html target= _blank www.bhphotovideo.com/c/product/248295-REG/Canon_6229A003_Deluxe_Backpack_200_EG.html/a

Q: 9. Anyone use these on D850? How do you control aperture?

A: These would work great on a D850. There is a physical aperture ring on the lens that you rotate to change the aperture.

Q: 10. Can you use autofocus on these lenses?

A: No, you cannot. All of the lenses in the Rokinon Cine DS 6 Lens Kit with Sony E Mount are manual focus and manual aperture control only; no auto functions are enabled on the Rokinon Cine DS lenses.