The Single-Channel 7.5 x 1.6" Dropover, in red, from Elasco Products is a heavy-duty dropover designed to cover tubing and pipes in construction and similar sites and allow safe passage for vehicle and heavy pedestrian traffic.

This dropover is made from high-strength, solid-cast polyurethane and offers a secure interlocking design, allowing you to create reliable runs of whatever length you need (with additional units, sold separately). It's slip-resistant to minimize accidental falls and is built to withstand extreme temperatures. The 7.5 x 1.6" measurement is the size of the channel, while the outer size is larger (please see Specifications).

Interlocking Single-Channel Design    Cover Tubes/Pipes in Construction Sites    For Vehicle & Heavy Pedestrian Traffic    Made from Solid-Cast Polyurethane    Slip-Resistant Surface    Secure Connection Points    Resistant to Extreme Weather Conditions    Built-In Handles on Bottom for Transport    NEC, OSHA, REACH, and RoHS Compliant    Made in the USA

• Interlocking single-channel dropover — 7.5 x 1.6" channel dimensions
• Lets you cover tubing and pipes in construction and similar sites and allow safe passage for vehicle and heavy pedestrian traffic
• Made from flexible, solid-cast polyurethane material — light, non-biodegradable, and generates less noise that metal, while offering superior tolerance to greases and chemical substances
• Slip-resistant surface pattern
• Strong, easy to secure, connection points
• Built-in handles underneath the base for easy transportation
• Easily cleaned and resistant to extreme weather, including blizzards and heat waves
• Fully compliant with NEC, OSHA, REACH, RoHS
• Made in the USA

Related Questions and Answers

Q: 1. Can this be use to connect a Blackmagic Intensity Shuttle to an iMac?

A: Yes, you can use the Apple Thunderbolt Cable (1.6') BH #APMD862LLA to connect the Blackmagic intensity shuttle to a Mac with Thunderbolt 2 ports.

Q: 2. Can the Logan glass cutter #704-1 be used with this rail?

A: Yes.

Q: 3. Does this mic have a 128 bit encryption?

A: Yes. The Revolabs xTagg uses 128-bit DSAA (DECT Standard Authentication Algorithm) authentication, 64 bit DECT Standard Cipher.

Q: 4. How long does the battery last under continuous usage? That is, how many hours of use on one charge?

A: I have used it for 6+ hour training sessions. I typically put it back in the stand during breaks but have not had any problems with the charge.

Q: 5. How do you use this with a 9 volt battery? I do not see any place to insert the battery

A: The battery compartment is located on the bottom panel of the M48 and is accessible by sliding and removing the battery case cover.

Q: 6. Would this cable connect my 27 iMac 2011 model with a 15 Mac Book Pro 2016 model?

A: Yes it will. You should turn off one, connect them, and then start it while pressing t and it will enter Target mode (it will show the Thunderbolt icon). It will mount as an external drive in the other computer.Once you are done, you eject the drive and turn off the machine by pressing the power button. Then, disconnect both machines.:)

Q: 7. how long is the cable?

A: 1.6 feet or 0.5m.

Q: 8. Does this version have the field replaceable battery?

A: Yes, it is. As a matter of fact, the first thing you have to do upon receiving the mic is to open the back and connect the provided battery. It takes all of 15 seconds. B

Q: 9. I'm using the Pearstone 4.2 (10.7cm) Articulating Arm to mount a Tascam dr70 onto a Sony a7S Camera Rig ES-T16. I have mounted a video light and external monitor to the 2 shoe mounts. I don't see a way to mount the Tascam into one of the holes in the cage without having to turn the whole arm (rather than being able to tighten the knob to secure the male end of the screw into the hole). What am I missing? thanks!

A: You have it right. You have to turn the whole arm into the screw hole, tighten it, then adjust the arm using the large knob.

Q: 10. I see a reply from Logan rep that the rail can be used with the #2000 mat cutter. Where do I get the clips that attach to the cutter and slide on the rail?

A: Unfortunately, we do not carry the 501/162 nylon guides and screws mentioned by Logan separately.