The Galaxy Audio JIB/CT Jacks in the Box Cable Tester allows you to quickly and easily test six different types of cables. Test XLR, 1/4", RCA, 1/8" SpeakOn, and DIN (Midi) cables.

The specially designed microprocessor will test the cable 200 times per second, meaning you can now catch intermittent problems that other testers miss. The pass/fail indicator light is easy to read in all lighting situations.

Checks XLR, 1/4", RCA, 1/8" SpeakOn, and DIN (Midi)

Use your cable tester to check six different types of cables; XLR, 1/4", RCA, 1/8" SpeakOn, and DIN (Midi)

By testing the cable 200 times per second you're able to catch intermittent problems that other testers just aren't able to sniff out

After five minutes of inactivity, the cable tester turns itself off to save your battery

A quick reference chart is located on the bottom of the Cable Tester

Related Questions and Answers

Q: 1. Do you also include a tripod and rail?

A: This is just for the track. It does not include anything else.

Q: 2. Will this device allow me to use an external mic, as well as receive the timecode from the Tentacle Sync at the same time? I have a Panasonic GH5.

A: The Tentacle TRACK E itself does not output a Time code signal. Instead it can get synced with a Tentacle Sync SYNC Es. This tiny Time code generator can feed any DSLR/Mirrorless camera with Audio TC. To feed an external mic into your GH5 you can use the following adapter: https://bhpho.to/2Sw5pE7 The splitter cable allows you to record an external mic along the auxiliary time code signal on your GH5.

Q: 3. Can you use a 4 wheel base on the track?

A: Yes you can. This system can be used with something like the Porta-Jib 3-Leg Spider Dolly (Track Wheels) which has such wheels on it, BH #POSP3T.

Q: 4. Does the 20lb capacity of the JonyJib 18 include the weight of a motorized head?

A: You will need to account for the weight of the motorized head.

Q: 5. Is there an adapter required or recommended to mount a 100mm ball base fluid head such as the manfrotto 509 to the JonyJib2?

A: If you would like to add a head on the end of the Jony JONYJIB15N 15' Jib just add this 100mm adapter to your order - https://bhpho.to/3sxTuDR

Q: 6. Stereo or mono-only input?

A: The Tentacle TRACK E is a mono recorder. It records one track only.

Q: 7. Does the maximum payload include the weight of the counterweights, or just the camera and head? Could the jib conceivably carry ~80lbs of combined payload of 30lbs of camera and head, along with the 50lbs (guess) of counterweight?

A: The max payload would be 44 lb for the Konova SUNJIB. This would not include counterweights. However, The optional tripod that carries the Jib and counterweights would need to be able to hold the total weight.

Q: 8. If I use a Tentacle with a Zoom H6, recording the timecode audio in one channel and at the audio output of the H6 I connect it to a camera via 3.5mm. Can post-production synchronize the timecode audio generated by the Tentacle of the h6 and the camera?

A: The Zoom H6's line output downmixes all channels to stereo. The only way to preserve isolation would be to record your timecode and audio as a stereo channel, with each panned hard left/right.

Q: 9. What is the right cable to connect the RED Komodo EXT port for timecode?

A: The Tentacle Sync SYNC E can be used as the Timecode generator to feed a signal into to RED Komodo.

Q: 10. What is the diameter of the track?

A: The diameter of the track is approximately 1 1/2".