The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6 dB boost between 2 and 15 kHz. This is the standard response for lavaliers worn on the outside of clothing (lapels, jackets, etc).

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is beige and features a Switchcraft TA4-female connector for use with specific* Electro-Voice wireless transmitters.

Shelved Frequency Response    Switchcraft TA4F Connector    Moisture-Resistant Capsule    Low Handling Noise    Beige

The EMW is available in three frequency response types and this version features a shelved frequency response that compensates for reflections lost when mounted on the outside of clothing and fabric. The shelved response is standard for lavalier microphones worn on lapels, jackets, etc.

The square EMW lavalier is available in a variety of colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited for providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation

Q: 2. Could I attach this handgrip to a regular tripod arm?

A: Yes, you could attach the handgrip in the Tilta Nucleus-M Wireless Lens Control System Partial Kit II (Right Handgrip) to a regular tripod arm. You will also need a clamp with an ARRI-standard rosette adapter.

Q: 3. Is there a way to set the range on the FIZ? The user guide only shows how to on the handle.

A: No, their is no way to do such Tilta Nucleus-M Wireless Lens Control System Partial Kit I.

Q: 4. What cable do i need for a remote start for the FX6?

A: The Tilta Nucleus-M Run/Stop Cable for Sony FS5/FS7, and Panasonic Eva Cameras will work. https://www.bhphotovideo.com/c/product/1490877-REG/tilta_rs_01_lanc_nucleus_m_2_5mm_lanc.html

Q: 5. is this working w/ a dji rs pro gimbal?

A: The Tilta Nucleus-M Wireless Lens Control System Partial Kit II could work with many products, including the RS gimbals from DJI. You would need to power it externally.

Q: 6. would this handgrip work with the nucleus-nano motors?

A: Yes, the Tilta Nucleus-M Handgrip in this kit works with the Nucleus-Nano motor.

Q: 7. will it work with 19mm rod?

A: Yes it will. This comes with two 19mm Motor Rod Clamps along with two 15mm Bushings. This works with both 19mm and 15mm rods.

Q: 8. So I can control a Nano and a this motor with just the left handle?

A: This handle can control either the Nucleus M or Nucleus Nano motor. it can only control 1 motor at a time.

Q: 9. i have a panasonic varicam lt and want to use one of the 4 pin dc power out ports to power the motors. is it possible and if so i need a male 4pin dc power cable to male 7pin lemo correct? do you have anything?

A: the DC output on the varicam LT will not power this this motor, you will need to power it from the D-tap output of the battery plate

Q: 10. How is the range holding up with walls and obsticles between the hand unit and motor and what are those ranges?

A: The Tilta Nucleus-M has a 1000' / 304m wireless line-of-sight range. It's hard to test and know exactly the range between different materials and interferences but the signal should be fine.