You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 2mm Cable And Mini 4-pin Connector For Mipro Wireless Transmitters (tan)

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 2mm Cable And Mini 4-pin Connector For Mipro Wireless Transmitters (tan)
  • Product Code: ga234659
  • Availability: In Stock

$1,695.00 $2,695.05

The tan E6 Omnidirectional Earset Mic, Medium Gain, with Detachable 2mm Cable and Mini 4-Pin Connector for MIPRO Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a screw-on mini 4-pin connector for direct connection to a Mini MIPRO 4-pin model wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    Mini 4-Pin (MN), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersMIPRO: ACT-707T (Older), MT-103 (Older), MT-303 (Older), MT-801 (Older), MT-808 (Older)
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x MIPRO Proprietary 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersMIPRO: ACT-707T (Older), MT-103 (Older), MT-303 (Older), MT-801 (Older), MT-808 (Older)
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
Sensitivity2 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x MIPRO Proprietary 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Does this gimbal include object tracking?

A: The DJI RS 3 Mini Gimbal Stabilizer features tracking.

Q: 2. How do I activate "tracking" on the RS 3 Mini? Can it be done while using a Canon camera?

A: The DJI RS 3 Mini Gimbal Stabilizer does not support Active Track 3.0 like the DJI RS3 Pro does when using supported DJI Image Transmitter. However, the DJI RS3 mini does offer a waypoint tracking mode function. Please see manual page 29 for more info on the waypoint tracking mode: https://bhpho.to/413JhiU

Q: 3. Can this be used with a Panasonic GX85 to trigger a Canon flash set on a tripod?

A: It could trigger the cannon flash , i don't know for the panasonic

Q: 4. will this work with leica m8 and metz 40mz-2 ?

A: Yes, the Vello FreeWave Mini-Stand Flash Trigger Set should be compatible for use with the Metz 40 MZ-2 TTL Shoe Mount Flash and the Leica M8 Rangefinder Digital Camera Body. However, do note that you will have to set the flash output manually, as the Vello FreeWave Mini-Stand Flash Trigger Set will not transmit TTL automatic flash exposure.

Q: 5. How work this device to output signal with windows 10?, as second monitor? The 2 SDI ouputs and HDMI output send the same signal and I can use all simultaneously?. Example I can use in power point presentation with extended monitor and use this device as second monitor and show the full screen presentation using both SDI and HDMI ouputs?

A: This not for a second monitor, this is a video card to use with premiere, final cut or other software.

Q: 6. Is this ultrasudio HD Mini compatible with FCPX 10.7.1 and Sonoma 14.1?

A: The Blackmagic Design UltraStudio HD Mini is compatible with FCPX 10.7 and macOS 14.0 Sonoma or later.

Q: 7. Can one Mac run both this and the ATEM software control?

A: Yes, the Blackmagic Design UltraStudio HD Mini, and an Black Magic Atem switcher should be able to coexist on a single Mac. Please add the cable below it is not included with the HD Mini. Also, please make sure you have Thunderbolt 3 ports on your Mac for the Blackmagic Design UltraStudio HD Mini. Apple Thunderbolt 3 Cable (2.6') BH #APMQ4H2AMA

Q: 8. What version of DaVinci Resolve comes with the UltraStudio HD Mini? The free version that can also be downloaded from the website or the Studio version?

A: You may download the free version of Resolve at any time from the website.

Q: 9. Can this be used with Pomfort Live Grade?

A: This device becomes an input video stream to the system. BMD provides record software to write it to disk and Livegrade could process that in post. However for a real time grading, Livegrade would need to be able to read the video input stream directly. I do not have livegrade, so I agree you need to contact them.

Q: 10. Will this work with micro 4/3 systems?

A: It works with my Olympus E-M5 markII and PM2.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Akg Sr 470 Uhf Wireless Receiver

$1,077.00 $1,572.42

Products You May Like

Focal Press The Underwater Photographer

$149.97 $191.96

Andycine Field Monitor Quick Release

$38.97 $58.07