The tan E6 and E6i Snap-On Microphone Cable from Countryman is designed for use with the E6 and E6i earset microphones. It can be used to replace a cable in the event of a short or break and is an alternative to replacing the entire microphone.

It features a snap-on design that has a 1/8" (3.5mm) Locking-mini connector for use with Nady wireless bodypack transmitters.

2mm Diameter Duramax Cable    1/8" (3.5mm) Locking-mini    Tan

These replaceable cables are available in various connector types to accommodate various wireless microphone transmitters. This cable features a 1/8" (3.5mm) Locking-mini connector for use with Nady wireless bodypack transmitters.

The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The replacement cables are available in matching E6 and E6i ear set colors. This cable is tan.

Related Questions and Answers

Q: 1. Is it compatible with lens support kit, Kirk LS-1? Does it interfere with the lens hood of new Sony 70-200 f2.8 GM II 2nd generation when we reversed and attached lens hood on lens

A: Yes.

Q: 2. will this fit the Sony 400mm F2.8 GM?

A: Unfortunately, Really Right Stuff LCF-101 is not compatible with Sony 400mm 2.8 GM. For that lens you can use this one: Really Right Stuff Lens Foot for Sony FE 400mm f/2.8 GM OSS & FE 600mm f/4 GM OSS Lenses BH #RELCF103 • MFR #LCF-103 https://www.bhphotovideo.com/c/product/1556949-REG

Q: 3. Will this foot prevent accidental release?

A: Yes it will

Q: 4. I own the FE 100-400mm and the original foot now shows a looseness even when screwed in to the max. The Looseness is from front to back. Unless I am mistaken, orginally there was no looseness. I am wondering if the design of this replacement will address this issue and offer a perfect thightness? Thanks!

A: I can answer my own question... The problem was not with the removable foot as I thought, but with the fixed portion on the lens where the removable foot attaches. That silver metal piece is screwed in the body of the lens. The screws unscrewed themselves due to vibrations in the Jeep on an African safari. I have now used removable Blue Loctite to insure that it does not happen again. I wanted to share it so that others can do prevention in making sure it does not happen to them and inflict bigger damage.

Q: 5. will this fit in New Sony 70-200mm f2.8 GM Mark II??

A: Yes, Really Right Stuff LCF-101 Replacement Foot for Sony FE 100-400mm f/4.5-5.6 GM OSS and FE 70-200mm f/2.8 GM OSS Lenses is also compatible with the 2nd generation of Sony FE 70-200mm f/2.8 GM OSS lens.

Q: 6. The RRS LCF-11 seems way over priced. I can get the, Kirk LP-64 Replacement Lens Foot for Nikon 70-200mm f/2.8E FL ED VR Lens for $80. Does anyone know if their is a just cause for a $40 difference?

A: I have both the RRS on my 500PF and the Kirk on my 70-200mm. Both are first rate. The RRS has the ability to use the Magpul QD strap which the Kirk does not. Is it worth the extra $40? It is to me.

Q: 7. Is this compatible with the Nikon 200mm F2 VRII?

A: No, the Kirk LP-63NSG Replacement Lens Foot with KES Sure Grip Coating for AF-S NIKKOR 500mm is not designed for use with the Nikon AF-S NIKKOR 200mm f/2G ED VR II Lens. Kirk does not list a replacement foot designed for use with the Nikon AF-S NIKKOR 200mm f/2G ED VR II Lens. However, they do list the Kirk Universal Multi-Use Lens Plate with 2 Screws (4.5"), B&H # KIKLP4502NV2, as recommended for use with the Nikon AF-S NIKKOR 200mm f/2G ED VR II Lens.

Q: 8. Can you properly balance a Nikon 500mm PF attached to a RRS LCF-11 & a Nikon D850 on a Wimberley WH-200 gimbal head?

A: Yes you can , they are ARCA compatible

Q: 9. does this replacement foot is balanced enough to make the lens stands horizontally?

A: Yes it does, with and without camera if you remove the two little screws on the bottom (security stoppers).

Q: 10. Will this fit the Sony FE 70-200mm F4 Macro G OSS II Lens?

A: The lens foot is not compatible with the Sony FE 70-200mm f/4 Macro G OSS II Lens (Sony E), B&H # SO702004G2.