The Countryman E6i Cardioid Microphone is a miniature ear-set microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The cardioid version effectively minimizes off-axis feedback and noise from nearby monitor speakers, instruments and noisy sources. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

The E6i is set apart from the original E6 with its softer flexible boom and silicon ear-pads. The flexible boom provides ease of boom adjustability to accommodate multi-user applications.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is cocoa and features a Switchcraft TA4F connector for use with AKG wireless transmitters.

Switchcraft TA4F for AKG    2mm Diameter Duramax Cable    Strong Vocals    Cardioid    Cocoa

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The cardioid polar pattern is effective in minimizing off-axis residual noise from e nearby monitor speakers, instruments and loud sources. The result is increased signal-to-noise ratio and minimal feedback. The flexible boom provides a custom fit for multiple users and close microphone positioning. The E6i is also available in an omnidirectional version for maximum control over wind noise and plosives (popping).

This E6i's sensitivity response is optimized to accurately capture strong vocals without noise and distortion. The high headroom is well suited for singers and performers in stage and broadcast applications.

Related Questions and Answers

Q: 1. Does it have the holes provided for the QD system?

A: Yes.

Q: 2. When mounted in vertical mode, is there a deduction in rigidity ?

A: No; the design of L-brackets such as the Really Right Stuff L-Plate Set for Nikon Z 7, Z 6, Z 5, Z 6II, and Z 7II are designed to offer stability and for the tripod head to properly lock onto the L-bracket securely with no reduction in performance, regardless if the camera is positioned in the horizontal or vertical orientation.

Q: 3. Is this bracket compatible with a Foolography Unleashed N2 on a Z6/Z7?

A: While the Foolography was not tested, it should fit since the bracket has room for the Nikon WR10 which is similar in size.

Q: 4. Can someone explain why these RRS L-plates don't have safety pins?

A: According to a note on Really Right Stuff's website under the Really Right Stuff L-Plate Set for Nikon Z7 and Z6, they state the Safety Stop feature is designed to prevent a camera from sliding out from a clamp when the ball head is oriented into the drop notch during portrait orientation shooting. Because an L-plate allows the user to mount a camera in portrait orientation without needing to use the ball head drop notch, this feature is not necessary.

Q: 5. Will this extension tube work with the Sony E-Mount 18-200mm f/3.5-6.3 Zoom Lens on my Nex 5N Camera?

A: Yes, I use them on that same lens.

Q: 6. can this be used with Nikon wr-r11b remote?

A: The WR-11B remote can be used when the vertical portion of the bracket is pulled out.

Q: 7. What advantages does this bracket have over the RRS Lightweight Bracket?

A: The Really Right Stuff Ultralight L-Bracket for Nikon Z 7 and Z 6, B&H # REBZ7LULLPLT, is a single piece that may only be used as an L-bracket. As it is a single piece, it is smaller and lightweight, measuring 4.17 x 3.03 x 1.50 inches (105.8 x 76.8 x 38.1 mm) LxHxW in size, and weighing 2.3 oz (66.9 g). The Really Right Stuff L-Plate Set for Nikon Z7 and Z6, B&H #REBZ7LSET, is a combination set that includes both a base plate and a upright "L" component, so you may choose to either use the base plate by itself or use it as an L-bracket. Configured as an L-bracket, it would be larger and heavier than the single piece Ultralight L-plate, measuring 5.73 x 2.37 x 3.14 inches (146 x 60 x 80 mm) and weighing 4.6 oz (129 g). It includes a hex key to assemble/disassemble the L-bracket as a free accessory. Other than size and weight, when configured as an L-bracket, both the Ultralight option and the 2-piece option would work similarly.

Q: 8. Will this work with the new Z 6II?

A: Yes, it will work with the Z6II.

Q: 9. Can you install the FTZ adapter with this L bracket mounted?

A: Yes, you can, however, you cannot uninstall it once the camera and bracket are placed into a clamp. Just remove it from the clamp, install it normally, and place it back into the clamp.

Q: 10. Is the vertical part removable?

A: Yes the vertical portion can be removed.