The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6 dB boost between 2 and 15 kHz. This is the standard response for lavaliers worn on the outside of clothing (lapels, jackets, etc).

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is black and features a 3-pin LEMO connector for use with Sennheiser wireless transmitters.

Shelved Frequency Response    3-Pin LEMO Connector    Moisture-Resistant Capsule    Low Handling Noise    Black

The EMW is available in three frequency response types and this version features a shelved frequency response that compensates for reflections lost when mounted on the outside of clothing and fabric. The shelved response is standard for lavalier microphones worn on lapels, jackets, etc.

The square EMW lavalier is available in a variety of colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited for providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. Is this trigger compatible with Neewer 750ii?

A: Yes, the Neewer QPRO-N TTL Wireless Trigger for Nikon is compatible with the Neewer 750II TTL Flash for Nikon DSLR Cameras.

Q: 2. Will that have 2.4 cellphone interference? Do you have a long wired connection cable choice between the motors and any of the transmitter hand units? How long can it be and where do I get it?

A: We are not aware of any interference that would be caused by cellphones with this unit. There is a longer 18" Motor to Motor cable available as well, B&H # TIWCT037PS45. https://bhpho.to/31AvKRj

Q: 3. Is the Nucleus M motor compatible with the DJI RS2 Gimbal? Could I power the Nucleus M motor through the usb-c port on the RS2?

A: The Tilta Nucleus-M Wireless Lens Control System's motor could be fitted to be attached on the DJI RS2 for lens control functionality; however, it receives power from one of the handle units from a 7-pin Lemo cable with DC Input Power 7.2 to 24 VDC. USB connections would not supply enough voltage. The Nucleus Nano Motor could be powered through USB: https://bhpho.to/2QdDrdc

Q: 4. Is this compatible with the 1dx mii?

A: Unfortunately no, the Canon BR-E1 is not compatible with the 1DX Mark II camera. You can use these remotes instead: https://bhpho.to/3b4YB4a https://bhpho.to/2vAEmMK

Q: 5. does this work with a Rebel t3i EOS 600D?

A: Unfortunately no, the T3i does not have blue tooth so it does not communicate with the BR-E1 remote. However, the Ti3 does work with the RC6 infrared remote: https://bhpho.to/3pYedkn

Q: 6. Will this item work as a receiver from a Godox TT685iiS flash and mount a Sony HVL- Have a Godox TT685iiS flash that I would like to use as a master flash and mount on camera. Have the camera setup as a master, flash turned off, and the G Godox Flash set at ch 02 Group A. Would like to use the WT-1T as the receiver and set it as the receiver to slave, Ch 02, Group A and install the Sony HVL-F60M flash on top of the Metz WT-1T as my second flash. Will this work as my second flash? The camera I am using is a Sony RX10M4

A: No. The following two systems have to different protocol systems so they will not communicate properly together.

Q: 7. I have 3 cameras canon, can I use the BR-E1 with whatever camera I’m using at the moment ?

A: You can select the 'Compatibility' tab under the Canon BR-E1 Wireless Remote Control to find out which Canon Cameras it is compatible with.

Q: 8. is this compatible with t8i?

A: The Canon BR-E1 Wireless Remote Control is compatible with the Canon EOS Rebel T8i camera.

Q: 9. Is it compatible with the C70?

A: No, the Canon BR-E1 Wireless Remote Control would not be compatible for use with the Canon EOS C70 Cinema Camera. According to Canon, the Canon RC-V100 Remote Controller, B&H # CARCV100, would instead be the correct remote controller for use with the Canon EOS C70 Cinema Camera.

Q: 10. Do you need WiFi to connect the Bluetooth? I want to be sure for an outdoor trip where there wouldn't be wifi access.

A: No, bluetooth communicates with the camera and remote, no wifi needed.