The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6 dB boost between 2 and 15 kHz. This is the standard response for lavaliers worn on the outside of clothing (lapels, jackets, etc).

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is cocoa and features a 1/8" (3.5mm) mini locking connector for use with Sennheiser wireless transmitters.

Shelved Frequency Response    3.5mm Locking Connector    Moisture-Resistant Capsule    Low Handling Noise    Cocoa

The EMW is available in three frequency response types and this version features a shelved frequency response that compensates for reflections lost when mounted on the outside of clothing and fabric. The shelved response is standard for lavalier microphones worn on lapels, jackets, etc.

The square EMW lavalier is available in a variety of colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited for providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. is this compatible with blackmagic ursa mini G2 4.6? it will work?

A: yes this will work with the URsa mini G2

Q: 2. I'm shooting in an environment that doesn't allow for any wireless transmission. Is it possible to control two motors with a single handgrip through a wired-only configuration? Can I turn off all wireless function? Can I run p-tap power into one motor, then into the second motor, then into the handgrip, and power/control all 3 devices?

A: Yes, The Tilta Nucleus-M will allow you to run wired for control. The way to turn off the wireless setting is under the high medium low settings. There's a setting for off, then just run a cable from the hand grips to the motors.

Q: 3. I have 3 cameras canon, can I use the BR-E1 with whatever camera I’m using at the moment ?

A: You can select the 'Compatibility' tab under the Canon BR-E1 Wireless Remote Control to find out which Canon Cameras it is compatible with.

Q: 4. Works with R5c?

A: Yes Canon R5c is compatible with Canon BR-E1 Wireless Remote Control.

Q: 5. Is it compatible with the C70?

A: No, the Canon BR-E1 Wireless Remote Control would not be compatible for use with the Canon EOS C70 Cinema Camera. According to Canon, the Canon RC-V100 Remote Controller, B&H # CARCV100, would instead be the correct remote controller for use with the Canon EOS C70 Cinema Camera.

Q: 6. is this compatible with t8i?

A: The Canon BR-E1 Wireless Remote Control is compatible with the Canon EOS Rebel T8i camera.

Q: 7. Can BR-E1 and camera shutter both be used once paired with R6?

A: Yes, it is possible to use both the shutter button on the Canon EOS R6 Mirrorless Digital camera and the shutter button on the Canon BR-E1 Wireless Remote Control to trigger the shutter on the Canon EOS R6 if you go to the camera's menu and go to [Shooting Menu: Remote Control] and set to [Enable]. I would not try to press the shutter button on the remote and the camera simultaneously, but if you are near your camera, you may use the camera's shutter button, then when you are at a distance from the camera, you can use the wireless remote without changing the camera settings.

Q: 8. Is the Nucleus M motor compatible with the DJI RS2 Gimbal? Could I power the Nucleus M motor through the usb-c port on the RS2?

A: The Tilta Nucleus-M Wireless Lens Control System's motor could be fitted to be attached on the DJI RS2 for lens control functionality; however, it receives power from one of the handle units from a 7-pin Lemo cable with DC Input Power 7.2 to 24 VDC. USB connections would not supply enough voltage. The Nucleus Nano Motor could be powered through USB: https://bhpho.to/2QdDrdc

Q: 9. Will this item work as a receiver from a Godox TT685iiS flash and mount a Sony HVL- Have a Godox TT685iiS flash that I would like to use as a master flash and mount on camera. Have the camera setup as a master, flash turned off, and the G Godox Flash set at ch 02 Group A. Would like to use the WT-1T as the receiver and set it as the receiver to slave, Ch 02, Group A and install the Sony HVL-F60M flash on top of the Metz WT-1T as my second flash. Will this work as my second flash? The camera I am using is a Sony RX10M4

A: No. The following two systems have to different protocol systems so they will not communicate properly together.

Q: 10. does the button work like the the camera shutter button (press 1/2 way and all the way)?

A: Yes, half way for focus, full press to shoot.