The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6 dB boost between 2 and 15 kHz. This is the standard response for lavaliers worn on the outside of clothing (lapels, jackets, etc).

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is black and features a Switchcraft TA4-female connector for use with specific* Electro-Voice wireless transmitters.

Shelved Frequency Response    Switchcraft TA4F Connector    Moisture-Resistant Capsule    Low Handling Noise    Black

The EMW is available in three frequency response types and this version features a shelved frequency response that compensates for reflections lost when mounted on the outside of clothing and fabric. The shelved response is standard for lavalier microphones worn on lapels, jackets, etc.

The square EMW lavalier is available in a variety of colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited for providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. Wired?

A: The controller included in this kit does not have a port for connecting to the follow focus motor with a physical cable therefore it can not operate as a wired solution. This is exclusively a wireless solution and it has a range of up to 1000 feet.

Q: 2. If I can use 18650 batteries to power the system, will it be strong enough to work and focus on a sigma 18-35 or 50-100?

A: Powering off of the internal 18650 batteries provides less torque than powering through a P-tap connector. However, there should be enough power pull focus for photo lenses.

Q: 3. Can you mount the right handgrip on the Red Komodo Outrigger handle?

A: You could probably mount the Tilta Nucleus-M Wireless Lens Control System Partial Kit V's right handgrip to the RED DIGITAL CINEMA KOMODO Outrigger Handle if you get creative enough, but we would not recommend it, as it would likely be awkward to handle.

Q: 4. is this working w/ a dji rs pro gimbal?

A: The Tilta Nucleus-M Wireless Lens Control System Partial Kit II could work with many products, including the RS gimbals from DJI. You would need to power it externally.

Q: 5. Does anyone have experience of using the Nucleus-M with the Canon RF 100mm macro? I work in the 1:2 to 1.4:1 range.

A: The Tilta Nucleus-M Wireless Lens Control System Partial Kit I is a great option for the Canon RF 100mm f/2.8 L Macro IS USM Lens as the Tilta Nucleus-M FIZ Hand Unit is capable of adjusting the torque on the motor for precise focus control.

Q: 6. I'm hoping I can use one grip for focus and the other grip for zoom. Is this possible?

A: Yes. The following kit includes. 2x Nucleus-M FIZ Lens Control Motors

Q: 7. Does the Right Handgrip display the battery level?

A: The Nucleus M handgrips do not have a battery level indicator in them. They do, however, have a voltage read out that can give you an idea of when the battery is low. If the handle is around 7v then you will want to swap out the batteries.

Q: 8. i have a panasonic varicam lt and want to use one of the 4 pin dc power out ports to power the motors. is it possible and if so i need a male 4pin dc power cable to male 7pin lemo correct? do you have anything?

A: the DC output on the varicam LT will not power this this motor, you will need to power it from the D-tap output of the battery plate

Q: 9. would this handgrip work with the nucleus-nano motors?

A: Yes, the Tilta Nucleus-M Handgrip in this kit works with the Nucleus-Nano motor.

Q: 10. Will this work with Nikon d3300,3400, and D4 cameras as far as record controls and focus and zoom with the two motors?

A: Tilta doesn't have a Run/Stop cable for those Nikon cameras yet but this also requires P-Tap power from a brick battery or D-Tap port + a 15MM rod system.