Best 5.25 Speakers For Bass

Kramer Tavor 5−o 5.25" Two-way, On-wall Powered Speakers (speaker Set, White)

Product Code: ga23518
Availability: In Stock

$624.00 $967.20

Qty

0 reviews Write a review

Description
Reviews (0)

The set of white Tavor 5−O 5.25" Two-Way On-Wall Powered Speakers from Kramer is comprised of two speakers, one housing the 2 x 30 W RMS amplifier and one unamplified speaker. The active loudspeaker contains the volume, treble and bass controls for the system and accepts a line−level stereo input. That speaker cabinet outputs an amplified signal to the passive speaker. Each 5-O cabinet includes a 5.25" polypropylene rubber edge woofer, which is complimented by the 0.5" Mylar dome tweeter. The system has a frequency response of 45 Hz to 20,000 cycles.

The speakers are magnetically shielded and utilize an enhanced bass reflex cabinet structure. The Tavor 5-O amplifier features auto-power shut-off circuitry and shuts the system down when it is not in use, as well as an automatic input voltage selector for 90 to 240V AC, 50 to 60Hz electricity usage.The set is designed for indoor wall mounting.

Parameters
Description	2−Way powered speakers
Built-in Amplifier	2 x 30 W RMS, 2 x 80 W continuous program
Frequency Response	75 Hz to 20 kHz @−10 dB, 100 Hz to 20 kHz @±3 dB
Woofer	5.25" (13.3 CM) polypropylene cone with rubber edge woofer
Tweeter	0.5" (1.3 CM) Mylar dome tweeter
Sensitivity	85 dB SPL, 1 W @ 1 m
Maximum SPL	Continuous: 105 dB, peak: 110 dB
Power Source	Variable: 90 to 240 V AC, 50/60 Hz
Crossover Frequency	8 kHz
Directivity Factor	5.8 averaged 1 kHz to 10 kHz
Directivity Index	7.6 dB averaged 1 kHz to 10 kHz
Input Connectors	Line level unbalanced stereo audio on a 1/8" (3.5 mm) mini jack Line level balanced stereo audio on a terminal block connector Line level unbalanced stereo audio on left and right RCA connectors
Output Connectors	Speaker (to connect to the external passive speaker) 1/8" (3.5mm) mini jack lineout for optional sub−woofer 1/8" (3.5mm) mini jack loop output
Damping Factor (8 Ω)	>100 @ 400 Hz
S/N Ratio	>83 dB
THD	<0.2%
Controls	Volume, bass and treble
Standby Power Consumption	0.7 W
Input Signal Detection Threshold	+8 mV to +11 mV
Material of Construction	Aluminum grill, steel brackets, ABS cabinet
Installation Clearance	Front panel to wall (with mounting bracket): 8.7" (22 cm) Back panel to wall (with mounting bracket): 1.8"(4.5 cm)
Dimensions	7.2 x 6.7 x 9.6" (18.3 x 17 x 24.4 cm) 7.2 x 6.8 x 10.4" (18.3 x 17.2 x 26.5 cm) with mounting bracket
Weight	Active speaker: 5.95 lb (2.7 kg) Passive Speaker: 4.85 lb (2.2 kg) Total: 10.8 lb (4.9 kg) With Mounting Kit Active Speaker: 6.83 lb (3.1 kg) Passive Speaker: 5.73 lb (2.6 kg) Total: 12.56 lb (5.7 kg)
Packaging Info
Package Weight	13.105 lb
Box Dimensions (LxWxH)	17.1 x 11.8 x 10"

Active loudspeaker - stereo 2 x 30 W RMS, 2 x 80 W continuous program amplifier and volume control

Audio level controls - volume, treble and bass

Magnetically shielded

Enhanced bass reflex

Auto Power - Shuts off when system is not in use, indicated by a LED

Automatic input voltage selector - 90 to 240 V AC, 50 to 60 Hz

Indoor wall mounting

Suitable for: home theater, conference rooms, boardrooms, classrooms, presentation venues

Related Questions and Answers

Q: 1. what is the ac voltage for the Kanto yu4 ?

A: The Kanto YU4 supports 100 to 240 VAC, 50 / 60 Hz.

Q: 2. How do I wire the two speakers together--can I do it with standard speaker wire?

A: When purchased, the speakers come with the cable to connect the two speakers. The main speaker has a 1/4" speaker output, and the second speaker has bare wire clips.

Q: 3. what's the difference between this one and the yu6?

A: The Yu4s have smaller drivers and a little less power with 70 W RMS and 1 x 4"woofer. While the Yu6 has 100 W RMS and 1 x 5.25" woofer.

Q: 4. Is Pure Matte white and Ice Gloss white?

A: That is correct!

Q: 5. Do these speakers get hot when in use? Can I place insulation directly on top of them? Please advise of any concerns in this regard. Thank you!

A: These speakers have a very tone for their size and price. I have a bunch of the installed in our classroom for a couple of years now, and have never experienced heating or performance degradation.

Q: 6. Is the walnut finish made of real solid walnut?

A: Our YU6's speakers in bamboo or walnut are made of real wood. If you have any other questions or require additional information, if you could please email us directly at support@kantoliving.com and we would be happy to help.

Q: 7. I'm having awful feedback whenever I turn these on and plug in the RCA cables to the back of the speaker (the 3.5 mm end). Even without the RCA cable plugged into anything like my Topping A90 amp, it still creates the feedback noise. I've tried multiple cables now after this happened with the cables Genelec supplied, and it keeps happening no matter what. However, it stops once I remove the RCA cable from the back of the speaker. Am I doing something wrong? Do I need a different cable? Any ideas?

A: It's a steady hum whenever it's powered on and the RCA cable is plugged into the back. If I plug in the other end of the RCA cable to anything else (my Topping amp, my other audio interfaces, etc.) the hum gets much louder. The RCA cable also seems to not fit the RCA input on the G1 or I have to use a tremendous amount of force to get the plug to even go halfway into the port.

Q: 8. Does the Genelec G One come with a mini to pair of RCA cables cable? Thanks!

A: The Genelec G One 2-Way Powered Bookshelf Speaker (White, Single) BH #GEG1BW does not come with RCA cables.

Q: 9. Does it come with a power supply? If so, how long is the cord?

A: A 19 VDC / 3.42 A power supply is included. The power cord is about 8 feet long.

Q: 10. Is this the newer (B) model or is it the older (A) model ?

A: The Genelec G Two 2-Way Powered Bookshelf Speaker (RAW, Single), B&H # GEG2BRW, is the newer B model.

There are no reviews for this product.