The beige Otto Engineering V1-10610 is a standard in-ear induction receiver for use with flat pack or neck loop inductors. The advantage of these types of systems is that they remain discreet, due to the fact that no wires travel directly to the ear.

Small and Light Weight    Comfortable Fit    Available for Right Ear Only    Use with Neck Loop or Flat Pack Inductor    Optional Squelch Version Available    Includes Carry Pouch + 4 x A10 Batteries    Includes 15 Wax Filters    Wax Filter Tool Included

Related Questions and Answers

Q: 1. What is the fully assembled weight of the product?

A: Feels like about 20-25 lbs.

Q: 2. does this work with head plus pro? or is it just for head one? Also, whats the camera load capacity when I use those heads?

A: This is compatible with both the HeadPLUS and HeadONE units. This has an 11 pound payload capacity. How much of a camera you can put on it will depend on the weight of the Head unit you use.

Q: 3. What is a good tripod for this rigs weight?

A: The weight of this Landparte rig as shown is 15 lbs/6.8 kg. Plus a camera would add about 6 lbs/ 2.7 kg for a total of 21 lbs /9.5 kg. However, Landparte shows their rig on a discontinued Manfrotto 701 fluid head that only has a capacity of 9.7 lbs/4.4 kg. Therefore I have to suggest a more robust tripod, the Benro BV10 Twin Leg Aluminum Tripod Kit being one example. It is at the affordable end of 22 lbs/10 kg tripods.

Q: 4. Is it possible this DSLR Rig to be used together with Sony a7s camera + FE PZ 28-135 F4 G OSS lens? The total length of the camera with the lens is 8 (211 mm). If not compatible, can I use this kit after replacing the rods with longer ones or should I be looking for other options of Lanparte V2 and V2B?

A: PK-01 is fine, but PK-02 is a lot better, either way you can rest assured cause LanParte's got you covered! You will need longer rods and a Lanparte Tele-Lens Support (TS-02) for the 28-135 F4 lens. Our rods have a variety of length ranging from 100mm-450mm. The rods on PK-01 are 300mm just purchase our rod extension screws (LPT-V2-059) you can just buy 100mm rods to make your rods 400mm in length. Or simply get 365mm rods. Don't worry about matte box vignetting since it only occurs on PK-01 at wider than 16mm.

Q: 5. Can you get a dummy battery for a GH5 for this kit?

A: Here you go: Lanparte BLF19P-01 DC Battery Dummy Pack B&H # LABLF19P01. The GH4 and the GH5 use the same battery.

Q: 6. can I use a nikon D4 on this rig?

A: Yes, LanParte PK-01 rig will take your Nikon D4 securely! The Magic Arm and Matte Box are both height adjustable so it will give you enough clearance for the D4. Also the Bridge Plate is height adjustable as well!

Q: 7. Would this rig work with a Blackmagic Ursa Mini?

A: The Lanparte Professional DSLR Kit V1 is for a DSLR camera therefore I believe it would not work.At this time, there is no rig specifically for the URSA Mini since it is so new it is not out yet. I would look for offerings by Lanparte, Wooden Camera, Zacuto and SHAPE.Attached is a basic rig that would get you started.

Q: 8. Does it come with batteries for the monitor?

A: The kit comes with a spring power cord that can power the monitor via battery and battery pinch power system.

Q: 9. If available where can I get the counter weights?

A: Here you go: Lanparte Stainless Steel Counter Weight B&H # LACW01

Q: 10. Is there a black sock to connect the lenses to the matte box?

A: Bradley K has the right idea! Pretty much everything you need is included!