Audio Wires Positive Negative

Camgear Wp-2 Wedge Plate

Product Code: ga23534
Availability: In Stock

$175.50 $221.13

Qty

4 reviews Write a review

Description
Reviews (4)

The WP-2 Wedge Plate enables mounting cameras to the Camgear DV6P fluid head. This plate includes one 1/4"-20 screw with a pin assembly.

For DV6P Fluid Head Includes 1/4"-20 Screw with Pin Assembly

Parameters
Dimensions	3.5 x 1.7" / 8.8 x 4.4 cm
Weight	1.8 oz / 49 g
Packaging Info
Package Weight	0.13 lb
Box Dimensions (LxWxH)	3.8 x 1.85 x 0.5"

Related Questions and Answers

Q: 1. I will be connecting (soldering) this wall mic to a mic cord and was wondering which wires are positive/negative and the same for microphone cable?

A: There are two wires on the back of the mic. The blue wire is positive (+) and the black wire is negative (-). Wiring instructions should be included with the microphone. For further information, you can reach technical support at Telex by phone at 800-898-6723.

Q: 2. Hi would this fit on the bottom of a sony pmw-500?

A: Yes this is compatible with the PMW-500 as long as you are using Sony's VCT-U14 quick release plate.

Q: 3. What's in the box? What do I get? Does it come with a case?

A: The product is one Camgear Pedestal And Dolly With 100mm Head. It does not come with a case.

Q: 4. What it your estimated date for shipping?

A: Sorry, no ETA on this item a this time. Wooden Camera is pretty good at delivering in a timely fashion however so it should not be too long.

Q: 5. Hi,Will this work for an old video 10?Ron

A: Hi Ron, I don't think it is. Seems like it's 8 and down or 10 and up are two different things.Just measure it. It's going to be one or the other. Hope that helps.Mike

Q: 6. Will this work with a Manfrotto MVH500A, MVH502A, Provista 7518B or 504HD head?

A: The Proaim Multi-Angle Levelling Wedge Plate uses 1/4"-20 and 3/8"-16 threads to attach to the top of the desired platform, so yes it is compatible with Manfrotto MVH500A, MVH502A, Provista 7518B and 504HD heads.

Q: 7. Is the top an arri dove tail? And works with any baseplate that has a arri dovetail adapter?

A: Yes, the top is a short ARRI dove tail and is compatible with baseplates that take ARRI standard dovetails.

Q: 8. It says it has a 44lb payload capacity, is this at 90 Degree tilt also? I'm looking to use this as an overhead rig with a RED Cine Package on a dana dolly.

A: the max load capacity reflects it;s max load capacity even at close to the 90 degree angle maximum extension, As with all thing of this nature I'd recommend you test it personally before committing you camera package to it on a shoot

Q: 9. Does it come with any sort of box/case?

A: no it does Not

Q: 10. Hi Sorry, I don't know the model # of my sachlter fluid head - it's quite old I think - but the opening for the plate is 1.2 (13cm) wide and 1.7 (16cm) long - do you think this one will this fit?

A: This plate is meant for specific Sachtler Tripod Heads, the DV-8, DV-8/100 and Video 14/75. However the Bromwell Quick Release plate with screw for Bromwell & Sachtler quick release adapters is 1.2 x 1.7 inches, the same dimensions as your older head, so it should work for you.

Carliss	11/09/2024
Bought this for my son and he started using almost immediately. He got some really cool pictures. 5

Greg	21/06/2024
I have owned every VCT plate out there Shape, Zacuto, movcam, chrosziel and i've sold them all. I found them to be incredibly heavy and cumbersome. I wanted something that maintained the low height of my FS7 body when its on my shoulder. Most VCT plates sit so high on the shoulder throwing off the centre of gravity, wooden camera managed to keep the shoulder pad tight to plate eliminating this problem. It only weighs 1.3 LBS which is important when travelling with a kit. They've also ingeniously incorporated their dovetail system into the plate for easy removal of the camera. I cannot recommend this plate enough to anyone trying to keep the weight and profile down of their camera. After a few weeks of shoulder intensive shooting I can confidently say this is the best product out there. 5

Tim	29/05/2024
Everything we needed, except the kitchen sink. 5

Matthew	06/05/2024
I had to place my bookshelf speakers on the floor because my cats ket knocking them down from where I had them. Sound quality suffered until I got these stands. They put my speakers at just the right angle to point the tweeters toward my easrs, restoring sound quality. These are a great product for tilting small speakers toward the listening position. 5