You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Trijicon Accupoint 3-9x40 Riflescope (matte Black)

Trijicon Accupoint 3-9x40 Riflescope (matte Black)
  • Product Code: ga235737
  • Availability: In Stock

$1,962.12 $2,511.51

Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all.

Trigicon's triumphant performance on battlefields across the globe translates to your success on the hunting field. The AccuPoint 3-9x40 Riflescope sports a venerable variable magnification range that delivers the flexibility to sight in dense brush or across open fields with ease. Sighting during twilight conditions is enhanced considerably by a notable 40mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions.

A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation.

1.0" Tube    Waterproof    Fogproof    Dual-Illuminated Red Triangle Reticle

Optics
Magnification3 to 9x
Objective Lens Diameter40 mm
Field of View3x: 33.8' @ 100 yd / 11.2 m @ 100 m
9x: 11.3' @ 100 yd / 3.8 m @ 100 m
Exit Pupil Diameter3x: 13.3 mm
9x: 4.4 mm
Eye Relief3.2 to 3.6" / 81 to 91 mm
Impact Point Correction40 MOA (Windage & Elevation)
Adjustment per Click: 1/4 MOA
Reticle
Reticle TypeTriangle Reticle
IlluminationNo
General
Maintube Diameter1"
Environmental ResistanceWater-Resistant to 10' / 3 m (Unrated)
DimensionsLength: 12.4" / 31.5 cm
Weight13.4 oz / 380 g
Packaging Info
Package Weight2.45 lb
Box Dimensions (LxWxH)14.75 x 3.75 x 3.25"

6061-T6 Aluminum main-tube is waterproof to 10'

Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective

Provide superior clarity, zero distortion, flare/glare reduction

Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries

A brilliant red triangle sits atop a single hollow post at the 6-o'clock position.
The reticle is illuminated through the use of fiber optics and tritium, providing a vivid aiming point without the need for failure-prone batteries.

Related Questions and Answers

Q: 1. I have lenses for my Panasonic gh4 and I am buying a Canon ef blackmagic. I have scoured the Internet for a converter that would work for this. No luck. Any leads?

A: The answer depends entirely on the specific camera you wish to use. In order that we may better assist you, please write us with further detail. provideo@bhphoto.com.

Q: 2. When I use this adapter with a Nikon D lens that has an aperture ring, I have both the ring on the lens and the ring on this adapter. Should I lock the ring on the lens and set my aperture on the adapter, or set the adapter to some setting and make my adjustments on the lens? Thanks

A: Keep the adapter aperture ring at the largest setting and use the aperture ring on you lens because there is no f stop number on the adapter. Otherwise either one is ok but not both

Q: 3. i want to use my Sigma 10mm f/2.8 Fisheye Lens for Nikon on sony a6000, will this adapter will do the job ?

A: I cab able using my Sigma 15mm fisheye

Q: 4. Will this control the Sigma 18-35mm f/1.8 DC HSM Art Lens for Nikon's aperture?

A: Yes, the Metabones Nikon G Lens to Sony NEX Camera Lens Mount Adapter (Matte Black) is able to control the aperture in the Sigma 18-35mm f/1.8 DC HSM Art Lens for Nikon.

Q: 5. I just purchased a Sony A7 from you. I have an NEX-7 so can use those lenses but I also have a large selection of various generations of Nikon lenses (vintages from my old F3 to current D800) that I would like to use on this body. What is the correct adapter. I see some from Metabones but they specifically indicate Nikon to NEX and not A7.

A: The Metabones Nikon G Lens to Sony NEX Camera Lens Mount Adapter is compatible with the Sony full frame E mount cameras such as the a7 and a7R. This adapter would be a good option for using your Nikon lenses on the a7 and NEX-7.

Q: 6. so basically the lens turns into a manual apperture, that is cool but:Does the metering in the camera still working ok when adapting a lense?does it has any quality lose while using the adapter?what about when taking still pictures? Does the shutter speed still working properly?

A: The metabones prevents the camera from communicating with the lens.So no, the camera doesn't tell you the aperture reading and will always read as 0. Therefore, you always have to use other means (zebras) to not over expose.You also can't achieve a desired aperture to control DOF (such as 2.8) because, again, the camera can't report the aperture.I haven't taken still pictures so I'm not sure how this affects that mode.

Q: 7. I want to use my 70-200 2.8 VR II on Sony A7, Can I do?Has AF?Thanks

A: Yes, you will be able to use a Nikkor 70-200mm VR II f/2.8 on the Sony A7 with this adapter, since it is a Nikon G lens. However, you will not be able to use electronic functions such as autofocus.

Q: 8. Would I be able to control the aperture of newer Nikon lenses like the 24-70 f2.8 VR via the aperture ring on the adapter? I don’t need electronic focus, or vr-just would like to control the aperture some way?

A: You will be able to open and close the aperture with the numbers you see on the adapter , there will be no data recorded to the camera . For a better adapter look at Vello Select Nikon F Lens to Sony E-Mount Camera Auto Lens Adapter (Firmware Ver. 6) B&H # VELAESENFV5 the autofocus is not reliable but you can control the aperture from the camera same as you would native Sony lenses

Q: 9. Does this adapter works with lenses that has a aperture ring already? So will it also work for non-G lenses?

A: This adapter does not work with Nikon F mounted lenses with an aperture like AI-s or AF-D series lenses. For an adapter that is compatible with these kind of lenses, please see B&H # MENFEBM2 .

Q: 10. My lens is nikon dx af-s nikkor 35mm 1:1,8 G, but the spec about the Photografy camera say ... Nikon F mount with AF contacts..., and the you prospect say The matte black Nikon G Lens to Sony NEX Camera Lens Mount Adapter from Metabones allows you to attach a Nikon F-mount G lens to a Sony NEX camera, I bought this model, is there any problem of damaging the contacts lens in question( nikon dx af-s nikkor 35mm 1:1,8 G) because I'm able to mount the lens on the adapter. Ednelson

A: The above Metabones Nikon G Lens to Micro Four Thirds Lens Mount Adapter is designed to allow you to connect the Nikon AF-S Nikkor 35mm f/1.8G DX Lens to Micro Four Thirds mount cameras. It is not compatible with Sony NEX cameras. If you need to connect the Nikon AF-S Nikkor 35mm f/1.8G DX Lens to a Sony NEX E-mount camera, you would need to purchase the Metabones Nikon G Lens to Sony NEX Camera Lens Mount Adapter (Matte Black), B&H # MENFGEBM1.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Robocup Holster (gray)

$53.97 $83.11

Aputure Fresnel 2x Attachment

$357.00 $524.79

Profoto 10° Grid (7", White)

$522.00 $657.72

Avenger D800kit Grip Kit And Bag

$374.64 $543.23

Focal Press Acting For The Stage

$116.85 $142.56

Neewer White Translucent Umbrella (60")

$122.67 $158.24

American Dj Dura Clamp Silver)

$11.97 $17.95

Lenscoat Legwrap Pro 312 (yellow)

$262.50 $380.62

Wandrd Duo Day Pack (black)

$702.00 $898.56

Pgytech Carrying Case For Dji Mavic 3

$101.85 $140.55

Products You May Like

Dremel 3d Digilab 3d45-edu Printer For Education

$6,597.00 $7,982.37

Canon Cli-281 Xl Cyan Ink Tank (8.3ml)

$63.00 $77.49

Pelican Charger Base For 9410 Led Lantern

$233.85 $322.71

Losmandy G11gt Equatorial Goto Mount With Tripod

$14,685.00 $21,586.95

Linhof 3-way Leveling Head I (77mm Base/top)

$3,698.97 $5,918.35