The 220V 24849EI Tensioned Advantage Deluxe Electrol 45 x 80" Ceiling-Recessed Motorized Screen from Da-Lite is designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

92" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Is that a standard gobo head used on the boom? Mine broke and need to replace. Thanks.

A: Thanks all. I contacted Matthews and learned that the head on the mini boom is identical to the standard matthews gobo head with one exception - the bolt is shorter on the mini boom head.

Q: 2. can this be used with a spiderlite td6?

A: Hi! Did you ever figure out if this works with the TD6?

Q: 3. How deep is this box, front to back?

A: This softbox would measure 32 from front to back.

Q: 4. Can this case fit a ViewSonic EP5542T 55" UHD monitor?

A: The Gator GLED4955ROTO Roto-Molded Case for LCD/LED Screens (49 to 55") is designed for standard 49-55" screens and would not be compatible with the kiosk design of the ViewSonic EP5542T 55" UHD 4K Portrait Touchscreen Kiosk Display.

Q: 5. Would this fit an Eizo CG277 or NEC PA272W?

A: It will fit the screens, but additional peripherals (including stands) will not fit.

Q: 6. what is the best mathews c stand for this boom?

A: Any c-stand, junior roller, combo, hi-roller will work depending on how much leg spread you need to assist the counterbalance for a safe hold. In other words, say you have just a head on this boom, with a c-stand and proper sand bags, you would be just fine. But if you start to carry more weight, upsize the stand. The whole point with this boom, its small and compact, designed to fit in cramped spaces. When you start to carry more weight, invest in a Manfrotto Mega-boom. It needs a junior roller or similar, but its still fairly compact for for its abilities.

Q: 7. Can this be used with ultra throw projectors?

A: The Kodak 80" 16:9 Tripod Projector Screen (Matte White) BH #KO80T169PSMW would not be the best choice for use with UST projectors. When used with a UST projector, set the lamp brightness to low or eco mode.

Q: 8. For the Matthews Mini Boom (45-80 ), what is the weight capacity when the boom is fully extended?

A: It is 8 lbs maximum capacity at full extension.

Q: 9. What is it's length when closed?

A: Hi. It's length folded/closed is approximately 49,21 inches / 1,25 meter.

Q: 10. I own a LG 29UM59-A 29" monitor, and according the product specs, the monitor is just under 30" wide. This case says it fits monitors between 27-32", but the interior length says it is 28.3". Does that mean my monitor won't fit?

A: This fits monitors between 27 to 32 inches diagonal. The interior dimensions of 28.3 x 19 x 3.5" are Length x Height x Width, which is a different specs. You would need to measure your monitor's L, W and H to be sure, but if it is 30" diagonal it should fit just fne.