The Rycote INV-7 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The entire mount is comprised of two large InVision lyres with two clips that accommodate microphone bodies measuring 0.7 to 0.9" in diameter. The lyres rest on a bar with a 3/8" threaded stand adapter at the base. The long support bar on this model accommodates microphones longer than 4.7".

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The versatile 0.7 to 0.9" mounting clips included with this system are intended for mounting a wide variety of microphones.

Fits Sennheiser MKH Microphones    Long Support Bar for Long Microphones    For Stand and Boom Mount Application    Large Lyre Size    Two 0.7 to 0.9" Mounting Clips    3/8" Threaded Stand Mount

The long support bar on this model accommodates microphones longer than 4.7".

The large lyre suspension webs measure 70mm long to accommodate heavier microphones. This is ideal for static stand mounting as well as boom placement.

The clips included with this system accommodate microphone diameters measuring between 0.7 to 0.9" in diameter. The clips mount a wide variety of microphones that measure under 4.7" long.

The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.

Related Questions and Answers

Q: 1. Will the bottom of the handle mount onto a boom pole and/or a hot shoe adaptor?

A: The included handle features a 3/8' threading compatible with a boom pole. Using the included shoe adapter also mountable to a camera.

Q: 2. Assuming that this shock mount can be used with a tripod, right? Else are there better mounts to mount to a tripod assuming no camera present?

A: The suspension mount in the Rycote Windshield and Suspension Kit for Zoom H6 Portable Recorder has a 3/8"-16 female thread for mounting onto tripods, boompoles, hand grips and other stands. If the tripod does not have a matching male 3/8"-16 mount, a simple thread adapter should allow for compatible mounting.

Q: 3. can i use this mic for my pc for streaming on twitch?

A: If you have a PC with a mic port, yes you can connect the Polsen SCL-1080 directly to that port but it will not sound very good. It would be best to use an audio interface with it for better results.

Q: 4. Is it compatible with a7iii and Ax53?

A: Yes The Rode Videomic GO II will work with either one, the mic needs plug and play power Sony cameras have this feature. keep in mind that the mic requires power so its going to rely on the cameras battery to get its power sharing the battery from the camera reducing the hours of battery life on camera but its minimal. Any questions please call or do a Video Chat with pro Audio . Thanks for using B&H.

Q: 5. Can you hang a U87 upside down using this shockmount?

A: The Diameter of the Neumann U87 is too large to fit this shock mount. A model that would work is the Auray SSM-NMN Suspension Shockmount for Neumann Microphones, B&H # AUSSMNMN.

Q: 6. Will the dead cat for the H6 capsules?

A: Yes, it will work.

Q: 7. a) can this be connected to a OnePlus Nord 2 phone? b) can it be connected to a laptop for podcast recording? c) does it have wifi or Bluetooth connectivity?

A: The Rode VideoMic Pro+ can be connected to a smartphone or computer when using adapters to enable compatibility. The mic does not have Wi-Fi or Bluetooth connectivity built-in. You can use a USB audio interface/adapter like the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (B&H # AUATR2XUSB) to connect the microphone to your OnePlus Nord 2 smartphone as well as to connect to your computer. The mic's 3.5mm TRS cable will connect to the input on the interface and it also has a headphone jack to monitor the audio. The attached USB-C connector will plug into your phone and also into your computer. It also includes a USB Type-A adapter which you can use if your computer has a USB Type-A port.

Q: 8. Does this come with the black foam cover as well? I also want the foam black one as well.

A: Yes, the RODE VideoMic GO II does come with a black foam windscreen, as well as the RODE WS12 Deluxe Windshield for VideoMic GO II, which is the fur windshield included with the kit.

Q: 9. Hi there. What is the maximum payload this can handle?

A: Rycote does not list a maximum weight the Rycote 041130 mount can support, only a minimum weight of 300g.

Q: 10. Would I also be able to use these straps to attach my camera to my backpack when I'm not carrying my tripod?

A: Yes, you can attach your camera strap to this carabiner and attach to your backpack.