The Rycote INV-8 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The entire mount is comprised of two large InVision lyres with two clips that measure 30mm in diameter for rotund microphone bodies. The lyres rest on a bar with a 3/8" threaded stand adapter at the base. The long support bar on this model accommodates microphones longer than 120mm.

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The versatile 30mm mounting clips included with this system are intended for mounting a wide variety of rotund microphones.

Long Support Bar for Long Microphones    For Stand and Boom Mount Application    Large Lyre Size    Two 30mm Mounting Clips    3/8" Threaded Stand Mount

The long support bar on this model accommodates microphones longer than 120mm.

The large lyre suspension webs measure 70mm high and 40mm wide to accommodate heavier microphones. This is ideal for static stand mounting as well as boom placement.

This model features two large InVision lyres with two clips that measure 30mm in diameter for rotund microphone bodies.

The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.

Related Questions and Answers

Q: 1. Does the dead cat from the original version fit this mic?

A: The Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone is a bit shorter and also a bit wider than the original VideoMic GO. The DeadCat GO may fit over the new GO II, but it will likely be tight on the diameter and have some extra length to accommodate for.

Q: 2. One of the answers in hear says that this comes with the fur windscreen, one says it does not. Which is it?

A: Mine came with a foam windscreen/cover, not a fur one.

Q: 3. Is this compatible with a Nikon Z6? And can it be powered via the connecting 3.5mm audio plug?

A: Yes, the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone is compatible for use with the Nikon Z6 Mirrorless Camera and would receive operational plug-in power from the camera's 3.5mm microphone input.

Q: 4. Will the bottom of the handle mount onto a boom pole and/or a hot shoe adaptor?

A: The included handle features a 3/8' threading compatible with a boom pole. Using the included shoe adapter also mountable to a camera.

Q: 5. a) can this be connected to a OnePlus Nord 2 phone? b) can it be connected to a laptop for podcast recording? c) does it have wifi or Bluetooth connectivity?

A: The Rode VideoMic Pro+ can be connected to a smartphone or computer when using adapters to enable compatibility. The mic does not have Wi-Fi or Bluetooth connectivity built-in. You can use a USB audio interface/adapter like the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (B&H # AUATR2XUSB) to connect the microphone to your OnePlus Nord 2 smartphone as well as to connect to your computer. The mic's 3.5mm TRS cable will connect to the input on the interface and it also has a headphone jack to monitor the audio. The attached USB-C connector will plug into your phone and also into your computer. It also includes a USB Type-A adapter which you can use if your computer has a USB Type-A port.

Q: 6. How if im using laowa 25mm is there any chance to use this?

A: Unfortunately it won't work because the Venus Optics Laowa 25mm doesn't accept regular filters in the front.

Q: 7. Assuming that this shock mount can be used with a tripod, right? Else are there better mounts to mount to a tripod assuming no camera present?

A: The suspension mount in the Rycote Windshield and Suspension Kit for Zoom H6 Portable Recorder has a 3/8"-16 female thread for mounting onto tripods, boompoles, hand grips and other stands. If the tripod does not have a matching male 3/8"-16 mount, a simple thread adapter should allow for compatible mounting.

Q: 8. Is the housing of the mic made of metal or plastic?

A: The barrel of the Rode VideoMic GO II Analog/USB Camera-Mount Shotgun Microphone is made of metal while the mic's shock mount is made of plastic.

Q: 9. What USB-C to USB-C cable is compatible with this mic? USB 4, 3.2, 3.1, 2.0? Will this work with 3rd party USB-C to USB-C cable to use on the computer?

A: The Rode USB 2.0 Type-C Male Cable (5') (BH #ROSC17) is recommended for use with the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone. The VideoMic GO II should work with third party USB-C cables supporting USB 2.0 and above.

Q: 10. Will one of these sizes fit the Shure MV88+ microphone?

A: The Rycote BBG Windshield is designed for use with larger pencil condenser and small-diaphragm condenser microphones and is not compatible for use with the Shure MOTIV MV88+ Digital Stereo Microphone.