The L8/18A-HI L-8 Series Gooseneck Lamp from Littlite is a lamp designed to provide illumination in virtually any work area or setup. The neck of the lamp is flexible and can be adjusted to provide the perfect lighting angle.

This model features a 5W incandescent lamp. The gooseneck lamp connects to a TNC connector base piece and can be detached as needed.

Gooseneck Lamp    Adjustable Neck    Detachable    Incandescent Bulb

Use this convenient and practical gooseneck lamp to bring illumination and improved viewing to virtually any work setup.

The neck of this lamp is flexible and can be adjusted to provide the perfect lighting angle.

Related Questions and Answers

Q: 1. Is the 1/4" screw only supposed to fasten to the top of the Ninja V (along with the M3 screws on the side) The other 1/4" does not fit the bottom of the cage.

A: To secure the cage to the monitor, the 1/4"-20 screw fastens to the top of the Ninja V.

Q: 2. Does the mounting disk have one or more set screws so that the head doesn’t come loose? (Hope that made sense.)

A: The mounting plate will have a single set screw in addition to the main screw in the center.

Q: 3. are the clamps metal or plastic

A: Sorry for the late response, you've probably already found the answer by now... The clamps are made of plastic. However, they're very thick and solid, locking extremely tight, with a nice solid snap into place. Hope this helps!

Q: 4. Does this tripod have a ball head?

A: No. It is a tripod only. The screw at the top accepts standard heads from various manufactures. If you'll look on the product's page on the b&h site, you'll see suggested accessories, including various heads.

Q: 5. What's the base diameter i.e. where the tripod mounts?

A: With our calipers, we measured 56.9mm / 2 6/25" on the mounting platform.

Q: 6. Does this tripod base have a bubble level?

A: Yes, the Benro TMA28A Series 2 Mach3 Aluminum Tripod has a bubble level.

Q: 7. How tall is this with the center section at its lowest?

A: The Benro TAD27A Series 2 Adventure Aluminum Tripod maximum height with center column at the lowest position is 53.1".

Q: 8. Does "Card Read Error" message count as a failure? I've used this card three times and each time during mid-shoot I received that error message. When I remount the card or reset the camera the message goes away and the images I've shot are still on the card. I'm not sure if my particular card is bad or not.

A: Sounds like Yes , I would try another card and determent if its the card of if its the camera

Q: 9. what size is the spike tread, 3/8-16?

A: Yes. The Benro TMA28A uses 3/8"-16 threads for its foot accessories.

Q: 10. how thick are the legs?

A: LEG DIAMETER 1 28.6 mm LEG DIAMETER 2 25.2 mm LEG DIAMETER 3 21.8 mm