The Ikan PS01 is a production slate/clapboard. The slate is manufactured from white acrylic and comes with black and yellow sticks. Ideal for whiteboard markers, the PS01 is a cost effective production tool which can be useful in virtually any production.

Black and Yellow Clap Sticks    Uses Dry Erase Markers    Case Protects Slate from Scratches    Made from 600D Cordura Nylon    Elastic Loop Holds Marker

Related Questions and Answers

Q: 1. What are the interior and exterior dimensions of the GC-11? PentaxRumors shows pic where GC-9 will just barely fit the GR iii, so I wonder if the GC-11 is thick enough for the Sony RX100 III, which is 4 x 2.37 x 1.63"?

A: the Ricoh GC-11 Soft Case is designed to hold the Ricoh GR III and Ricoh GR IIIx Digital Cameras. The larger GR IIIx which is a tighter fit in the case is 4.3 x 2.4 x 1.4". With the Sony Cyber-shot DSC-RX100 III Digital Camera being a thicker camera at a bit over 1.6" in depth, this case would not be a good fit.

Q: 2. Are the colors on this clapper vector compatible?

A: As with any colors, the varied hues and tones on the clapper sticks of the Elvid 9-Section Acrylic Production Slate with Color Clapper Sticks (B&H# ELPS911C) can certainly be used in post production to manually and visually match them with those on one's monitor. However, they are only rough approximations of scientifically calibrated colors and are not designed to be compatible with any calibration tool nor standardized scientific color calibration specification.

Q: 3. What type/size of allen key screws and washers to replace if need to?

A: 1/8" bolts, washers, and holding nuts would do fine with the Elvid 7-Section Acrylic Production Slate with Soft Case Kit.

Q: 4. How loud is the clapper (db)?

A: The volume of the Elvid 9-Section Acrylic Production Slate with Color Clapper Sticks is determined by how hard you clap it. On average the clap will be around 100 DB.

Q: 5. are the colours stickers or paint?

A: the colors on the front is in one piece of plastic with the different colors. the black and white on the back side are made with white stickers.

Q: 6. What is the recommended markers to be used?

A: We recommend Da-Lite brand whiteboard markers: Da-Lite Markers-set. https://www.bhphotovideo.com/c/product/317297-REG/Da_Lite_43220_Markers_set_of_1_ea.html

Q: 7. Is there a difference in quality between the 7 section and 9 section boards?

A: The 7-Section and 9-Section Slates are made with the same white acrylic material.

Q: 8. Does this one have the double magnet closure like the black and white ones have?

A: Yes it does. This uses a magnet system to keep the clapper closed and tight.

Q: 9. Are the colours stickers or paint?

A: This would be painted on, it would not be stickers.

Q: 10. Will this fit the GR II?

A: Yes.