The PDIC80T 8" Two-Way In-Ceiling Speaker System with Transformer (Pair) from Pyle-Pro offers an 8" midbass speaker, 1" high temperature voice coil, and directable 1" titanium dome tweeter. Frequency response is rated at 55Hz to 22KHz and peak power is rated at 300W. The unit is designed for placement in a ceiling and a cutout must be made to accommodate the dimensions of each speaker. This unit is sold as a set of (2) speakers. This model features a 70V transformer tapping at 8 Ohms 30, 20, 15, 10, and 5W.

Two-Way Speaker    Midbass Speaker    Voice Coil    Dome Tweeter    In-Ceiling Installation

Use this unit to achieve an audio installation that integrates almost seamlessly with your design environment by way of installation in a ceiling cutout.

Related Questions and Answers

Q: 1. Can a fluid head be mounted on this tripod for better video performance? If so, any recommendations?

A: The Digital Balance Pro is an excellent video head for these legs.a href= http://www.bhphotovideo.com/c/product/825418-REG/Daiwa_Slik_618_665_Digital_Balance_Pro_Fluid.html target= _blank http://www.bhphotovideo.com/c/product/825418-REG/Daiwa_Slik_618_665_Digital_Balance_Pro_Fluid.html/a

Q: 2. Can tripod be used for macro photography?

A: Yes, it can. The center column can be split in two and then reversed, so the head will hang between the legs.

Q: 3. Will this tripod hold a Nikon D500 with a 600 lens?

A: Sherri;you shouldn't have any problems with this combination.

Q: 4. Is the pan and tilt eead removable so you may use a gimbal head?

A: Yes Slik Pro 700 DX Tripod with 700DX 3-Way, Pan-and-Tilt Head (Titanium) comes with a removable head and you can place a gimbal head on its place.

Q: 5. Can a Konus spotting scope be mounted to this tripod? Would I need an adapter of some sort?

A: Good question. I honestly wouldn't know.

Q: 6. can a slider be mounted on this?

A: I actually just recently used this tripod in a film. I was using a pretty stripped down Black Magic URSA Mini 4.6k. I mounted a three foot slider on the tripod but found that the camera was a bit too heavy, and as the camera moved away from the center of the slider, the tripod head began to have trouble supporting the full load. So I used two C-Stands on either side to support the ends of the slider. However, if you're using a DSLR or another light weight camera, I don't think you'd run into that problem. It's a really sturdy tripod, but the head is just not made for extremely heavy loads.

Q: 7. Will the 3way head support the Photek TRI-X-2500 Tripod Extender with a light weight camcorder or camera. I'm concerned about the quick release. Will everything work together?

A: This tripod has a load capacity of 19.8 pounds. It should be able to handle the weight of a small camera or camcorder and B&H # PHT2500. However we suggest that you use a sandbag on the other side that the camera is not on to keep the tripod balanced. An option that you can fill yourself, as you may not need a full 5 pounds, would be the ideal choice for that. https://bhpho.to/2K5SHpe

Q: 8. Can you elaborate about the pan head? Also can I replace the pan-head with a ball head for this tripod? I would also like to know if this tripod model's legs are the same as http://www.bhphotovideo.com/c/product/557127-REG/Slik_615_317_700DX_Pro_Tripod_Legs.html

A: Here is the direct link to the head itself. Please see the following link:http://bhpho.to/1hJ65rDThe legs are the same as the Slik 615-317 and you can replace the head with any other brand or model tripod head that uses a 1/4-20 or 3/8-16 thread mount.

Q: 9. How do I adjust the tilt friction on my SLIK 700DX? I use a Nikon 700 with the heavy 70-200 lens. The overall weight does not allow me to position the camera beyond straight and level. If I tilt the camera it just keeps going when I take my hand off. (Yes, I am a novice but still need the help. Thanks)

A: There is no friction control on this tripod. It's either tight or loose. If the head is slipping after tightening, then the head may need an adjustment from Slik. You can however remove the head and substitute it for a more sturdy head.

Q: 10. Can a Gitzo GS3750D Panoramic Disc be attached to the head?

A: You should be able to connect these without any problems.