The DVI-D 4-Port Splitter from Smart-AVI allows you to output a single DVI-D signal to 4 displays, simultaneously. The hardware device requires no drivers to operate. It supports single-link DVI resolutions of up to 1920 x 1200.

1920 x 1200

Compliant with DVI 1.0 specification

Supports single-link DVI with a maximum resolution of 1920 x 1200

Cascading support

Supports PanelLink digital technology

Related Questions and Answers

Q: 1. Can this split an input and send to multiple outputs OR is this always 1 input to 1 output routing?

A: You can take 1 input to as many outputs as you want. It's a full matrix router.

Q: 2. Currently I have 3G cables running to all my equipment, would this cleanswitch work for me or do I have to have 6G cabling?

A: As Blackmagic Design has stated, 3G cables would be fine for short distances of 6G signals or at greater lengths for 3G signals. If you plan on using 4K content, you may want to consider upgrading cables if your distance is significant.

Q: 3. Can it track the sun?

A: Yes, Benro Polaris Astro Edition 3-Axis Smart Tripod Head would track the sun and other celestial objects.

Q: 4. Can you control this with a Wi-Fi only enabled tablet or do you have to use a phone/tablet with cellular service?

A: It should be possible on a wifi enabled device. This uses a local wifi network. Cell service should not be a factor.

Q: 5. Does it work with Z 6_2/ Z 7_2? What is the wattage of the battery?

A: Yes, the Benro Polaris Astro Edition 3-Axis Smart Tripod Head is compatible with the Nikon Z6 II and Z7 II. Benro does not list the wattage or specs on the internal battery.

Q: 6. Does the BR209 support Panasonic G9 (Mark1)?

A: The electronic communications of the Benro Polaris Astro Edition 3-Axis Smart Tripod Head are not fully compatible with the Panasonic Lumix G9 Mirrorless Camera.

Q: 7. Will this switch act as a signal booster? I have very long cable runs planned to connect to this cleanswitch, and then another fairly long cable run from the cleanswitch to an ATEM switcher. I need it for its routing abilities too, but my biggest concern is signal loss.

A: All SDI signals will be reclocked in the Videohub. If the signal properly makes it to the Videohub you will be able to transmit a clean output signal.

Q: 8. Why does the Astro Edition need a sim and sd card?

A: Benro Polaris Astro Edition 3-Axis Smart Tripod Head BH #BEPOAS3AX requires a MicroSD card to work. The Micro-SD card is used to store configuration, input settings, firmware information, and save the photos. You’ll need to insert a SIM card with a network connection to control the Benro Polaris over a phone network and remove any distance restrictions for remote control.

Q: 9. What is the battery's lifetime?

A: At this time Benro lists the battery on the Benro Polaris Astro Edition 3-Axis Smart Tripod Head as 24-Hour Battery Run Time. And does not list the life time.

Q: 10. Will this work with a Canon 6D? (The 6D has been astro-modified, so it's live view only.)

A: Yes Benro Polaris Astro Edition 3-Axis Smart Tripod Head is compatible with the Canon 6d.