The grey F102-2424-08 2" Broadway Control Cubes from Primacoustic are a set of high-density absorptive cubes designed to provide an acoustic treatment where you want to control primary reflections, eliminate flutter echo, and reduce standing waves. A typical installation includes a series of these cubes spread in an array across a wall surface. This configuration allows energy to reflect back into the room to prevent deadening of the acoustic space and leaves a sense of balance and natural ambient acoustics.

The cubes are easy to install on virtually any surface. Their small size makes them particularly well-suited for installation in live-end and dead-end spaces such as studios and home theaters. However, spreading multiple blocks across a larger space, such as practice rooms or studios, can also be an economical choice for a larger installation.

This model is made from 6-pound-per-cubic-foot fiberglass and has a panel depth of 2". It also features square edges. The set includes (12) blocks, which are sufficient for a total surface coverage of 48 square feet. Mounting the blocks on Primacoustic's Offset Impalers can create a space between the blocks and the mounting surface to further enhance the absorptive performance of this product.

Acoustic Treatment    Control Primary Reflections    Eliminate Flutter Echo    Reduce Standing Waves    Block-Shaped Design    Easy Mounting on Any Surface    Small or Large Installations    High-Density Fiberglass

Use these blocks to improve acoustics by controlling primary reflections, eliminating flutter echo, and reducing standing waves.

The blocks can be mounted to virtually any surface.

This solution works equally well in small- or large-scale installations.

Related Questions and Answers

Q: 1. Will this also control Panasonic projectors?

A: The Epson ELPSP10 PixiePlus Control System - BH #EPELPSP10 is not designed for compatibility with Panasonic or any other brand of projector.

Q: 2. When having 8x Hyperdeck Studio Mini Recorders connected to the Extreme Control will I be able to do Instant sports replays live?

A: The Extreme Control has no special replay capabilities. You would need third party software or hardware for that.

Q: 3. Is the $269.95 comes as all photos shows one handle controls with cables and all other accessories plus the two arms with the second handle as last photo shows

A: The following item is comes enclosed with the following DJI Tethered Control Handle for RS 2 NATO/RSA Expansion Adapter Control Cable (11.8") Limited 1-Year Warranty

Q: 4. what connector type? cable length ?

A: Thank you for your inquiry and consideration. The ZC-9Pro can be used with both Canon and Fujinon 8-pin lenses. It is .7m/ 2.3ft in length. If you have further questions, please contact the Libec team at info@a href= http://libecsales.com target= _blank libecsales.com/a or at 310-787-9400. Thanks again

Q: 5. Can I use it with the Canon 50-1000mm lens?

A: No this control is meant for inexpensive camcorders. It depends on your set up what is best. If used on a TV camera, most likely you would want this. Canon ZSD-300D Digital Zoom Servo Demand for Digital ENG/EFP Lenses B&H # CAZSD300D

Q: 6. Does this work with the bgh1? If not can you suggest a remote start/stop handle that will work with the bgh1.

A: Yes, you will need a Panasonic GH Series Run/Stop Cable for Wooden Handle. https://www.bhphotovideo.com/c/product/1547294-REG/tilta_rs_ta_ghs_side_handle_run_stop.html

Q: 7. Does this also work with the Alexa Mini LF?

A: yes it will the ARRI control protocol is standard across their cameras

Q: 8. Will this work with the A6500? I've tried other cables supposedly that work for Sony but the only ones I've found to work are either the actual Sony controller or the Fotga 3rd party controller. Don't the A6500 & A7S/A7 have the same remote protocols?

A: This unit works like a charm on both the a6300 and a6500 (I have both). The cable that comes with the unit plugs into the camera's micro usb port and allows control of the record on/off function via the Tilta handles green start/stop button.

Q: 9. Remote for UX 90

A: This will not work with the Panasonic UX90. It is for camcorders that use the Sony EX remote system. Instead you would want to look at B&H # LIZCLP, which is the Libec ZC-LP LANC Zoom Control for Select Sony/Canon/Panasonic Cameras. https://bhpho.to/2zISEJX

Q: 10. Will the run stop remote work with the BHG1?

A: Yes, you also need to get: https://www.bhphotovideo.com/c/product/1547294-REG/tilta_rs_ta_ghs_side_handle_run_stop.html