The ARRI ST2 2000W Studio Hanging Fresnel, part of the True Blue Series of tungsten lighting fixtures, updates a well-known industry standard. Feedback from respected lighting professionals, combined with great advances in technology, allows ARRI to present a selection of Fresnels with over 30 new improvements for studio lighting.

The tilt lock has been improved by using a stainless steel friction disc that locks tight. This eliminates the danger of the fixture suddenly tilting downward when heavy, front-mounted barndoors or softboxes are in use. In addition, a stirrup center adjustment allows the head to slide until its center of gravity is either at or near the tilt lock. This assures a better balance and easier adjustments.

When fitted with a 2000 watt bulb (available separately) this fixture will provide a 982 fc beam 3' in diameter from 19.8' at full spot. From the same distance, it will throw a 106 fc beam 21.1' in diameter at full flood.

10" Lens, Manual Control    Requires Connector

• Meets IP23 standard, suitable for indoor or outdoor use, providing a degree of protection against falling rain (up to a 60° angle from vertical)
• CE declaration and independently assessed TUV certification
• The laser-cut hexagonal safety mesh maximizes light transmission and istough enough to withstand location abuse

Related Questions and Answers

Q: 1. Will it fit on Impact 300 VSD? S-type

A: The unit is designed for LED. It is not compatible with flash.

Q: 2. Will this work with Godox VL300?

A: Yes it will

Q: 3. I have the VL300. Will the FLS8 and FLS10 work with that light?

A: Yes, the FLS8 is designed and made for the following Godox units. SL-150 VL-300 M-600D

Q: 4. Is this compatible with aputure amaran 60s?

A: Yes, the Godox FLS8 Fresnel Lens (BH #GOFLS8) is compatible with Aputure Amaran 60s lights with Bowens mounts, such as the amaran COB 60d S Daylight LED Monolight (BH #AMAPA0020A10).

Q: 5. The product description says "Exclusively for LS C120d, C120dII, C300d" Does it not work with C300d mk II? I know the barn doors don't work because of heat. Same issue here?

A: You can use it on the C300D MKII as well.

Q: 6. Will the flash tube in the AD600 (non pro) contact the rear lens?

A: These fresnels were not designed to be used with a flash.

Q: 7. Can this fresnel attachment project a circle of light with tack sharp edges?

A: Fresnels have soft falloff on the edges. In order to get a crisp edge you would need a Leko or a ellipsoidal.

Q: 8. Will the modelling lamp from a Godox AD400Pro contact the rear lens of the fresnel attachment, preventing it from mounting the light?

A: We have tested it and the flash tube does not fit into the fresnel.

Q: 9. Will it fit the AD400?

A: The Godox FLS8 Fresnel Lens will work with the AD400, yes.

Q: 10. Has anyone used this successfully with a non-pro version AD600?

A: Starting with it in a slightly zoomed out position, the Godox FLS8 Fresnel Lens (B&H# GOFLS8) can easily fit on the Godox AD600BM Witstro Manual All-In-One Outdoor Flash (B&H# GOAD600BM) or Godox AD600B Witstro TTL All-In-One Outdoor Flash (B&H# GOAD600B) as long as the manufacturer's stated 104 degrees Fahrenheit (40 degrees Celsius) maximum temperature is kept in mind. It should be kept in mind that when components are left in hot cars, used with strobes firing at high rates or with high powered LED COBs left on for extended periods, or in direct sun for enough time, their temperatures will exceed the ambient temperature.