The Azden 35XT Plug-In Transmitter is intended for use with Azden's 325 and 305 series wireless microphone systems. The 35XT plug-in transmitter features an XLR input for connecting your favorite handheld wired microphone. The transmitter features 188 selectable UHF frequencies, an LCD display and operates on two AA alkaline batteries.

35XT Plug-in Transmitter    188 Selectable Frequencies

Up to 188 UHF selectable frequencies are provided and ensure a clear channel in any location.

The 35XT transmitter features an intuitive digital display for monitoring channel, frequency, battery level status, etc.

Related Questions and Answers

Q: 1. Can you turn OFF individual groups REMOTELY so you can METER each group individually?

A: Hi,Yes you can have full control of groups separately or you can have them all on.I hope this helps.Regards,WillMac Group Brand Manager Lighting

Q: 2. Will an old Elinchrom Quadra A Head work with a Nikon D850 in TTL mode with this unit? In other words, can I set my Nikon to, say, 1/250 and f11, use a single Quadra head automatically, and have the exposure come out right? I already have the original skyport unit, and if I put it in the hot shoe of the D850, it fires my Quadra just fine , but only in manual. Im trying to decide if this unit will get a capability I dont already have.

A: No; these units do not have TTL flash metering.

Q: 3. Is this compatible with the LUMIX GH6?

A: Although it can fit a Panasonic Lumix GH6, the TTL functions on this particular EL-Skyport Transmitter Pro are only compatible with Olympus.

Q: 4. Will this transmitter be compatible with the ELC Pro HD 1000 monolight right out of the box (i.e. No need for any firmware updates, etc...)?

A: I don't have an ELC Pro HD 1000. I suppose it should. I have Quadra, RX Style, and Digital RX Power Pack 2400 and it works with all of them (Nikon Version on D3X).

Q: 5. Dear sirs: I have 6 BX500Ri, It operates the high speed sync?

A: Don Enrique,Like you I have several Elinchrom heads, however the high speed sync is designed for the quadra HS . With all others I found you can use the EL-Skyport to push a LITTLE past your max sync speed. My max is 1/250 so I can shoot at 1/320 sometimes I can get away with 1/400 and not see any banding. Other than that it is still a great product! I use it continuously with no issues.

Q: 6. Is this compatable with eos r with a rotolight ii?

A: This transmitter is compatible with the Canon EOS R as per the manufacturer to trigger both Elinchrom lamp heads with a Skyport receiver or the Rotolight NEO 2.

Q: 7. Will this product be compatible with the Sony HVL-F43RM or the new Sony HVL-F45RM?

A: No

Q: 8. The picture showcase the EL-Skyport (old Version). If we buy it on B&H, Is it the new version of the transmitter Pro - Code EL19371 on the Elinchrom Website (without the EL-Skyport write on it) ?

A: The EL-Skyport Transmitter Pro for Sony that we carry is the most current version.

Q: 9. How can i incorporate my canon 600 exrt with this trigger?

A: The only possible wireless route is Pocket Wizard if you are having HS in mind - expensive route. Hhnel and some other similar pass-through hotshoe trigger/transceiver products can be used. Elinchrom has built EL Skyport Receivers HS recently, which will be triggered by this HS trigger. This also means that for each speedlite you will need such an Elinchrom receiver plus. This seems to be the better option because you will need only this HS trigger on top of your camera (comparing to other systems), which will trigger your speedlite which should be on top of the Receiver HS. However, I am not convinced that Elinchrom has mastered HS technology 100%. Though I love my Elinchrom strobes.

Q: 10. Will this trigger a roto aeos + hvl43m? Plugged into a7iii

A: This transmitter will not work with a HVL43M.