The Tiffen 52mm Low Light Linear Polarizer Filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. This results in a noticeable increase in the saturation of skies and foliage, as well as clearer imagery when photographing in hazy conditions. A linear polarizer differs from a circular polarizer in that it does not supports use of a camera's autofocus or auto exposure functions; it is best suited for use with manual cameras, such as view cameras, that are not dependent on internal mechanisms to determine focus or metering settings.

This low light polarizer has less of a polarizing effect than a standard polarizer, allowing for it to be used in indoor and darker situations when available light is at a premium. This filter is also more ideal to pair with others so the filter factor does not become overwhelming. The low light linear polarizer requires approximately 1 stop of exposure compensation.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 10,000th of an inch, and then mounting to precision metal rings.

Helps to Eliminate Reflections and Glare    Reduces Haze and Blue Cast in Landscapes    Greater Color and Tonal Saturation    Low Light Design Ideal for Indoor Use    Rotating Filter Mount    ColorCore Technology

Low light polarizer is less dense than a standard polarizer, allowing for greater light transmission and more versatility when working in darker conditions.

Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface.

Polarizing filters arrange, and filter, directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of the light.

Clears up haze in distant landscapes and provides more saturated, vivid colors.

Strongest effect when used at a 90° angle from the sun.

Constructed using Tiffen's ColorCore technology.

Related Questions and Answers

Q: 1. Minimum iso that i can measure with this?

A: The following unit has a iso range of 3-409600

Q: 2. As it is a constant light source, can the light intensity be adjusted?

A: Yes. The Ring72 is split into two halves (L and R) and each can be individually adjusted.

Q: 3. I plan to use this ring light on the canon R6 with the 100mm macro lens. Will it work please?

A: The Canon RF 100mm f/2.8 L Macro IS USM Lens uses a 67mm thread, which the Godox RING48 will accommodate.

Q: 4. How do I mount this light to shoe on the sony camcorder pj670? The included shoe does not connect. (The shoe on the camcorder is recessed and I can't slide the mount in).

A: I bought a handle adaptor. It attaches where you would mount a tripod. The handle comes up and over the top of camcorder, and you would slide this light into the slot. The shoe on top of your camcorder can be used with a flash.

Q: 5. Will there be a unit compatible with Olympus in the near future?

A: We don't have an official information from Profoto if they will release a Profoto A10 AirTTL-S Studio Light for Olympus in future.

Q: 6. can i plug it to 220 vac?

A: Unfortunately, no; Godox does not offer the GodoxQS400II Flash Head in a version compatible for operation on 220V voltage. If you are looking for a monolight strobe head from Godox that may be used on 220V, the GodoxAD600BM Witstro Manual All-In-One Outdoor Flash,B&H#GOAD600BM, or GodoxAD600B Witstro TTL All-In-One Outdoor Flash,B&H#GOAD600B, are both dual-voltage units that may operate on 100-240V voltage. If you were looking for a 400W monolight in the price range similar to the GodoxQS400II Flash Head, then I would instead recommend the RayaSDR-400 Alpha Monolight,B&H#RASDR400, for your usage needs. Do note that you will have to purchase a modeling lamp with the correct voltage and a plug adapter for the country in which you will use the monolight (these are not included and must be purchased separately).

Q: 7. Hi there. Can I use my Flashpoint R2 pro 2.4 GHz Transmitter for Sony (XPro- S) with this Godox AD100 pro? Thank you

A: Yes this will work Godox makes Flashpoint.

Q: 8. Is there an LED or fluorescent light alternative for modeling light?

A: While there are screw base LED and fluorescent lamps, they cannot be dimmed in most cases and are two large to fit through the glass dome of this monolight.

Q: 9. Is the flash trigger included?

A: A flash trigger is not included, being that they are camera-dependent.

Q: 10. Can you see the touchscreen on a bright day? Or will it be like an iPhone where you can't see anything.

A: If the sun hits it directly, it is hard to see.The workaround is to swivel the receptor head while taking a reading.It rotates 90clockwise and 180 counterclockwise.