The Pro Co Sound MT4QQ-10 is a 4 channel Acculink cable for studio harness applications. This cable offers 1/4" TS Male to 1/4" TS Male connectivity on Showsaver 1/4" connectors.

4 Channels    Mono 2 Conductor Phone    1/4" TS Male to 1/4" TS Male    Showsaver Phone Connectors    10' (3.1 m) Length

The cable is a 4 channel Acculink Armorflex jacketed 2 conductor wire with numbered pairs for accurate connectivity

This 4 channel cable is made for analog studio applications

Related Questions and Answers

Q: 1. I have a question about how the hdmi record trigger interacts with pre-roll recording. If the recording begins with the timecode running would that mean that consecutive tracks would have overlapping timecodes based on the length of the pre-roll?

A: Not really as you won't be going over anything. When done you save everything as a file. If you wanted to redo something you would create a new file and then edit the files in Post.

Q: 2. I'm currently using a preamp (CL-1) on my old field recorder with a dynamic mic. Will I still need the preamp with the Mix-Pre-3 II?

A: Hello William. The CL-1 is a remote control and keyboard interface for the 7-series. Perhaps you mean an MM-1 or MP-1? The MixPre-3 II has built-in mic preamps, so you should not require an external preamp.

Q: 3. Can I jam sync timecode using my Fujifilm X-T3?

A: Thank you for your question. Neither the Fujifilm or the Mix pre 3 generate time code. You would need to get an external time code syncing device and input the devices into the mic input on camera and the TRS AUX in on the mix pre. I suggest using the Tentacle Sync Sync E Timecode Generator with Bluetooth (Dual Set) BH #TETE2

Q: 4. Can it record .wav files and mp3 files simultaneously?

A: no

Q: 5. Will this work with an Alexa Plus?

A: Yes, you can use the Mixpre-3 II with the camera but will need adapters to connect the recorder's 3.5mm TRS output to the camera's XLR 5-pin audio input. You could use a 3.5mm to XLR 3-pin male cable such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 3' (B&H # KORSMXM03) combined with a TecNec 5-Pin XLR Male to 3-Pin XLR Female .(B&H # TEXLM5XLF18I).r

Q: 6. Does this recorder, can record 3 xlr inputs and one stereo from the aux in 5 individual tracks?

A: It can only record 3 audio sources at once. That can be any combination of XLR and AUX-IN sources.

Q: 7. Does this unit respond to HDMI record triggers and HDMI timecode from Sony Z90 and NX80?

A: Yes, the recorder features a 1 x HDMI Type-D SMPTE Timecode Input.

Q: 8. Does this allow separate level mixing for recording and line out? For separate live streaming and post production uses.

A: Hello Michael. The MixPre-3 II allows you to record individual inputs at specific levels, while also recording a left/right mix. Analog output gain can be adjusted as necessary for the AUX-OUT jack. However, all fader activity affects levels of recorded tracks and output levels.

Q: 9. Does the Mix Pre 3 can record trigger with the Red Komodo?

A: Recording on the Sound Devices MixPre-3 II Field Recorder can be triggered via timecode or HDMI timecode. If the RED Digital Cinema Komodo Camera can output a timecode trigger signal it should be able to trigger recording on the MixPre-3 II.

Q: 10. can i add a 3.5mm jack microphone?

A: An adapter would be required. Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter B&H # KOAXMMF: https://bhpho.to/3DC1cAN The Kopul A-XMMF is an adapter that lets you connect a mic equipped with a 3.5mm TRS connector to the XLR input of a professional camera, recorder, or mixing console. The VXLR is terminated by a 3.5mm female TRS connector at one end and an XLR male connector at the other.