The HPRC (High-Performance Resin Cases) 2600F Hard Case with Cubed Foam Interior (Red) is a lightweight, waterproof, unbreakable case. It meets ATA 300 specifications for transit cases. The hard-resin shells are virtually unbreakable, and the interior rubber O-rings keep the case air and watertight. It comes with a comfortable, soft-grip handle for carrying and an air pressure release valve. The case can be used to carry audio, photo or video equipment and accessories. It is backed by a lifetime replacement warranty.

This case has a cubed foam interior.

For Video, Audio and Photo Equipment    TTX01 High-strength Resin Case    Super-soft Hard Rigid Grip Handles    Lifetime Replacement Warranty

Unbreakable, waterproof, resin case with a cubed foam interior made to carry audio, photo or video equipment and accessories

Neoprene O-rings keep the cases air and watertight

Temperature rating = -40 to +176°F (-40 to +80°C)

Air pressure release valve

For field comfort the case is carried by a super-soft grip, rigid handle

• Meets or exceeds ATA (Air Transport Association) 300 rated for shipping cases
• IP67 military specification is an international standard IEC 60529 that classifies the level of protection that is provided against the intrusion of solid objects or dust, accidental contact, and water. The first digit indicates the level of protection that the enclosure provides against access to hazardous parts and the ingress of solid foreign objects. The rating of 6 indicates the highest level of protection - no ingress of dust, complete protection against contact. The second digit indicates the protection of equipment against harmful ingress of water. The rating of 7 (out of 8) ensures that entry of water in harmful quantity shall not be possible when the case is immersed in water under defined conditions of pressure and time (up to at least 1.0 m of submersion).
• STANAG 4280 and DS 81-41 are NATO equivalents for military specifications for standardized endurance and quality tests designed to simulate extreme situations
• Flammability rating of HB standard, V-0 available by special order: from UL 94 Flame Rating System

Backed by a lifetime replacement warranty

Related Questions and Answers

Q: 1. Is this 100% compatible with the Samsung 870 4TB drive? Please confirm with certainty.

A: No, the ANDYCINE LunchBox II Magnalium Case for SATA SSD to Atomos Ninja V/V+ Attachment is not compatible with the Samsung 870 SSD's but the ANDYCINE LunchBox III Magnalium Case for 2.5" SATA SSD to Atomos Ninja V/V+ Attachment is.

Q: 2. Will this work with Atomos Ninja 5.2?

A: Yes, the LunchBox II Magnalium Case for SATA SSD to Atomos Ninja V/V+ Attachment (Red) works with the Atomos Ninja 5.2" 4K HDMI Recording Monitor.

Q: 3. Does it comes with msata to sata adapter?

A: No. would be nice but the following is required. ANDYCINE USB Type-C Reader for LunchBox SATA SSD BH #ANLNCHBXREAD • MFR #LUNCHBOX-READER https://bhpho.to/3cHMi3Y

Q: 4. xt1/2 plus battery grip will it fit ?

A: The XT1/2 with a battery grip will fit in this case.

Q: 5. Eventhough it is tested and listed with only the samsung SSD's-1TB-2TB, as anyone tried with the 4tb SSD's?

A: The current testing with the ANDYCINE LunchBox II Magnalium Case for SATA SSD to Atomos Ninja V/V+ Attachment (Red) is showing up to 2TB, but that may change depending on the controller on 4TB SSD drives if they will handshake with the product.

Q: 6. Would it work with SanDisk Ultra 3D SSD 1/2 TB ?

A: The ANDYCINE LunchBox II Magnalium Case is only compatible with 870 EVO 1TB/2TB, 870 QVO 1TB/2TB, 860 EVO 1TB/2TB, 860 QVO 1TB/2TB Samsung 2TB 870 EVO SATA III 2.5" Internal SSD BH #SAMZ77E2T0B

Q: 7. Is this compatible with the connect module?

A: The Atomos CONNECT Network, Wireless & SDI Expansion for NINJA V/V+ should be able to slot over the ANDYCINE LunchBox II Magnalium Case for SATA SSD to Atomos Ninja V/V+ Attachment (Red) when used with either the Atomos Ninja V 5" 4K HDMI Recording Monitor or the Atomos Ninja V+ 5.2" 8K HDMI H.265 Raw Recording Monitor.

Q: 8. Can I add a Teradek 500 RX to this SmallHD Cine 7 on Camera Monitor with Red Control kit to my RED Scarlet W DSMC2? And if so, how? Thank you

A: If you are looking to add a wireless receiver to your SmallHD Cine 7 Touchscreen On-Camera Monitor with RED Control Kit (L-Series) I would recommend you get the Teradek Bolt 4K RX Monitor Module for Cine 7 and 702 Touch (V-Mount), which is designed to replace the batter plate on the SmallHD Cine 7 and screw directly onto the back of the monitor. See: https://www.bhphotovideo.com/c/product/1593084-REG/teradek_10_2139_v7_bolt_4k_rx_monitor.html

Q: 9. Does it fit a Ninja v with a connect?

A: Yes, the ANDYCINE LunchBox Magnalium Case for mSATA SSD to Atomos Ninja V Attachment (Red) will fit on the Atomos Ninja V with the Atomos CONNECT Network, Wireless & SDI Expansion for NINJA V/V+ attached.

Q: 10. Does one need a cover if one removes the L series battery plate?

A: We do not believe a cover would be needed.