The RDL TX-TPR1A Active Single-Pair Receiver is compatible with Format A twisted pair products. The line-level receiver has an RJ-45 input, which feeds the -10 dBV unbalanced RCA phono jack output or the +4 dBu balanced detachable terminal block output. Power can be provided from 24 VDC power supply to the power jack or the detachable terminal block.

Use with RDL Format-A Twisted Pair    -10 dBV Unbalanced Output    +4 dBu Balanced Output    Phono and Detachable Terminal Block Outs    Switch Selects Output Pair    Powered Locally or Remotely    Pass-Through to the Loop Out Jack    Terminal Block or DC Power Jack    Active Balanced Circuitry    Daisy-Chain to Additional Receivers

RJ-45 loop out can be used to daisy-chain up to 10 receivers

Studio-quality buffer feeds balanced and unbalanced outputs for maintaining correct operating level

Related Questions and Answers

Q: 1. Anyone know how the YN560TX-Pro must be configured? It is suppose to work as a YN622TX, but I cant get it to work with the YN685 in Ttl 622 remote mode. Manual says to upgrade firmware, but the pc program from the webpage is not detecting the YN560TX-Pro and the flash YN685 can only be upgraded via wireless from the transmitter connected to the pc. Is the update still not out or do I have to put some special configuration on my pc? What flash models are confirmed to work with this controller in ETTL?

A: The device is compatible with YN200 and YN862-series Speedlites and the 560/660/720/860/603/605 triggers.

Q: 2. I know this works with Nikon DSLRs, but how compatible is this with Nikon z6 ii?

A: This transmitter has not been tested with the Nikon Z6 II to our knowledge, so the results may vary when using the two together.

Q: 3. Will I be able to control power and zoom on Nikon SB-600 and sb-800 flashes with this unit?

A: No,this transmitter is compatible with a variety of equipment, including YN200 and YN862-series Speedlites and the 560/660/720/860/603/605 triggers

Q: 4. Does the Yongnuo YN560-TX PRO work with the canon EOS M50 camera

A: Yes, but we highly suggest using Godox system as it offers a bigger echo system. Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC • MFR #XPROC https://bhpho.to/2EoHkHG Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/3IhRs4e

Q: 5. this unit can shot 603 radio series ????

A: This unit does work with YN 603 transceivers.

Q: 6. Thank you once again.What if I connect both speedlights on a flash trigger like Yongnuo RF-603C II.Would I still need to do the firmware update?

A: For the best performance, it is best to update the firmware for this products.

Q: 7. Does it trigger 622?

A: This can work with 622 transceivers.

Q: 8. Does the iTTL works when I connect a Nikon sb600 to yn622nii and using yn560 tx pro? Cheers

A: Yes, the Yongnuo YN560-TX PRO Flash Controller for Nikon can work with the Yongnuo i-TTL Transceiver YN622N II for Nikon Cameras with the SB-600

Q: 9. will a Sony A7R mk3 hotshoe trigger this unit? I'm ok with or without TTL

A: This unit has a metal shoe that can cause issues with the Sony shoe. It would be best to use a transmitter like the Godox XPro that has a plastic for specifically made for Sony shoes.

Q: 10. Does the YN560-tx pro for Nikon work with the YN968N old version with the updated firmware version 1.06 in iTTL?

A: Yes