This is the Winsted Dual-Pole Monitor Mount. It consists of two 42" poles that support a 42 - 63" monitor. The rugged construction is complimented by a mount that has 4 pre-set pitch positions. In addition, it tilts +/- 15 °. The unit also includes cable management accommodation as well as a locking latch for item security.

Supports 42 - 63" Monitor    With Cable Management    Lockable Latch for Security

Easily attaches to Sight-Line's exclusive Versa-Trak mounting system

Pivoting monitor mount

Security latch and cable management features

Related Questions and Answers

Q: 1. I have seen images of this monitor in a shelf-top case instead of the road case shown here. Is that available as an option? I'm more interested in it for an edit suite than in the field.

A: Currently the Lilliput 15.6 in available only with the case. You are, of course, free to remove the monitor from the case for use in your installation.

Q: 2. Can I use the battery plate and the vesa mount simultaneously?

A: You can use the battery plate, but it cannot be connected directly to the monitor when it is used with a VESA mount. It would only be able to be connected through the XLR port for power.

Q: 3. This monitor supports quad splitting over HDMI, but can it also provide side by side for a 2 camera production?

A: Yes, the monitor has side by side display function.

Q: 4. What is the exact measurement between the screw holes? The description says 3", but my monitors have holes just under 3".

A: This plate has standard 75mm and 100mm mounting patterns.

Q: 5. Where does the V-Mount battery adapter plate mount? I had read on older versions it took up the holes for VESA mounting. Is that true? Can you only have one or the other?

A: Thank you for your inquiry, the BM150-4K comes with 75mm and 100mm VESA holes on the back of the monitor, usually the V-mount locks on the 75mm VESA holes and our user remove it with double sides tape to mount on other place if they use the 75mm mount monitor stand, but the monitor comes with 2 metal pieces table stand in the package.

Q: 6. Is there a version of this that supports more weight?

A: This model can hold 17.6 lbs: https://www.bhphotovideo.com/c/product/1594006-REG/kupo_kg037511_super_knuckle_vesa_monitor.html

Q: 7. Any chance the 5/8" receiver is threaded? We wish to mount the Monitor Mount Adapter onto a Auray RFMS-580 that has 5/8" threads

A: No, unfortunately, the Impact ME-108P Monitor Mount Adapter is not threaded. A workaround is using these two products together with the Auray RFMS-580 Reflection Filter Tripod Mic Stand. The Impact Female Threaded 3/8" to Male 5/8" Stud Adapter - 50mm Long and the CAMVATE 3/8"-16 Male to 5/8"-27 Female Mic Stand Thread Adapter. See the links below: https://bhpho.to/2C1Oiim https://bhpho.to/3ogmhi3

Q: 8. Any image latency? Does 4K introduce any picture delay? I'm looking for a good jib monitor that can handle both HD and UHD. Thanks

A: If properly set up between the camera and the monitor, there is no latency that has been reported. While this is a fine monitor for on set up and for looking at what the jib is doing, it might bee too big to be on the jib itself. For that you may wish to use a 7 such as a SmallHD 702 7 OLED On-Camera Monitor B&H # SMMON702OLED.

Q: 9. Does this kit come with the 4 beds mount screws too?

A: Yes, comes with the screws.

Q: 10. Can I use 2 x SDI inputs and 2 x HDMI inputs for qaud view?

A: The Lilliput 15.6" 12G-SDI 4K IPS Monitor (Gold Mount, 6 RU) BH #LIBM15012GAB will support 2 x SDI inputs + 2 x HDMI inputs for quad viewimg.